Switch action | __- a |
Tool speed is increased by increasing pres- |
|
sure on the trigger. To start the tool, simply |
|
pull the trigger. Release the trigger to stop. |
|
CAUTION :
Before inserting the battery cartridge into the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released.
Reversing switch action
This tool has a reversing switch to change the direction of rotation. Slide the revers- ing switch to the left for clockwise rota- tion or to the right for counterclockwise.
Reversing switch
\\ | \\ | \ |
CAUTION :
0 Always check the direction of rotation before operation.
0 Move the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool.
Speed change
To change the speed, slide the speed change lever to the "H" side for high speed or "L" side for low speed. To slide the speed change lever easily, pull the trigger slightly while pushing the speed change lever. Be sure that the speed change lever is set to the correct position before opera-
tion. Use the right speed for your job.Speed
change lever
CAUTION :
Always set the speed change lever fully into the correct position. If you operate the tool with the speed change lever positioned halfways between the "H" side and "L" side, the tool may be damaged.
9
