VOLTAGE WARNING: Before connecting the tool t o a power source (receptacle, outlet, etc.) be sure the voltage supplied is the same as that specified on the nameplate of the tool. A power source with voltage greater than that specified for the tool can result in SERIOUS INJURY t o the user - as well as damage to the tool. If in doubt, DO NOT PLUG IN THE TOOL. Using a power source with voltage less than the nameplate rating is harmful to the motor.
ADDITIONAL SAFETY RULES
1.Always be sure that the tool is switched off and unplugged before carrying out any work on the tool.
2.Use only Makita genuine driver bits and screw strips specified for this tool.
3.Always be sure you have a firm footing.
Be sure no one is below when using the tool in high locations.
4.Hold the tool firmly and squarely against the workpiece.
5.Keep hands away from rotating parts.
6.When driving into walls, floors or wherever "live" electrical wires may be encountered, DO NOT TOUCH ANY METAL PARTS OF THE TOOL!
Hold the tool only by the insulated grasping surfaces t o prevent electric shock if you drive into a "live" wire.
7.Never lubricate the moving parts such as the feeder box. Malfunction of the tool may result.
SAVE THESE INSTRUCTIONS.
4
