Makita 6832 instruction manual Adjusting the stopper plate , 2, 3

Adjusting the stopper plate (Fig. 1, 2, 3 & 4)

There are two kinds of stopper plates; one is for screws 25 mm (1") - 41 mm (1-5/8")long and the other is for screws 40 mm (1-9/16") - 57 mm (2-1/4") long. When the tool is shipped, the former stopper plate is installed on the casing and the latter stopper plate on the feeder box. Replace the stopper plate as necessary.

Stopper plate for

~screws 25 mm (1" 41 mm (1-5/8")Ion

Stopper for

screws 40 mm (1-9/16")-

57 mm (2-1/4") long

Fig.

Pins

Fig. :

5