Makita 6832 instruction manual Pin

Adjust the stopper plate in accordance with the screw length as shown in Fig, 3 81 4. If necessary, loosen the bolts which secure the stopper plate.

Fig. 3-1 :	For screws 25 mm (1") - 28 mm (1-1/8") long
Fig. 3-2:	For screws 28 mm (1-1/8") - 35 mm (1-3/8") long
Fig.3-3:	For screws35 mm (1-3/8") - 41 mm (1-5/8") long
Fig. 4-1 :	For screws 40 mm (1-9/16") - 44 mm (1-3/4") long
Fig. 4-2 :	For screws 44 mm (1-3/4") - 51 mm (2") long
Fig. 4-3:	For screws 51 mm (2") - 57 mm (2-1/4") long

Then tighten the bolts to secure the stopper plate.

NOTE :

As for Fig. 3-2, 3-3, 4-2 & 4-3, secure the stopper plate with both ends contacting the pins on each side to keep the stopper plate from tilting.

Pin

Fig. 3-1 Fig. 3-2 Fig. 3-3

Fig.

6