Installing the screw strip (Fig. 8 819)
Insert the screw strip through the screw guide. Then insert it through the feeder box until the first screw reaches the position next to the driving position.
Feeder box | position | |
|
Screw strip
I |
| Fig. |
Fig. 8 | I | |
Removing the screw strip (Fig. IO) | / | |
To remove the screw strip, just pull it out | ||
in the direction of the arrow. |
I
Fig. 1(
Carry hook (Fig. 11)
The carry hook is convenient for hooking the tool to your belt. It can be installed on either side of the machine. To remove it, pull it out in the direction of the arrow while raising. To install the hook, push it down until it "clicks" into place on the tool.
Hook
Fig. 11
8
