Makita GA4043C, GA5043C, GA4543C, GA4541C Spiral bevel gear large one, Ball bearings 696ZZ/ 6201DDW

P 7/ 14

Repair

[3] DISASSEMBLY/ASSEMBLY

[3] -3. Spiral bevel gear [large one], Ball bearings 696ZZ/ 6201DDW

DISASSEMBLING

Note: The gear and the ball bearings can be replaced without disassembling the motor section.

(1)Remove Ball bearing 696ZZ, Retaining ring S-9, Flat washer 10 and C-type plate from Spindle as drawn in Fig. 7.

Fig. 7

1.Remove four M4x16 Hex socket head bolts, then separate Bearing box section from Gear housing.

M4x16 Hex socket head bolt

Bearing box section

2.Remove Ball bearing 696ZZ with 1R269.

1R269

Ball bearing 696ZZ

3. Remove Retaining ring S-9	4. Remove Flat washer 10.
with 1R291.	Then, remove C-type plate.
1R291
	C-type plate.
Retaining	Flat washer 10
ring S-9

5. Receive Bearing box with 1R258	6. Joint sleeve can be removed.
and remove Spindle by pressing it
with Arbor press.
	Joint sleeve
Arbor press

7.Using 1R291, remove Retaining ring R-26 from the inside of Lead flange.

Then, separate Lead flange from Spindle .

1R258

1R258

1R258

		Retaining
		ring R-26
1R258		Spindle
	Spindle	Lead flange