![](/images/new-backgrounds/1283145/28314527x1.webp)
Repair
[3]DISASSEMBLY/ASSEMBLY
[3]-7. Table Section (cont.)
DISASSEMBLING
9)Lever (Lock lever) is fastened to Frame with each two pieces of Hex socket button head bolt M6 and Flat washer 7.
When removing Lever, follow the instruction described in Fig. 35.
P 14/ 30
Lever
Fig. 35
If this bolt is removed first, the force of Torsion spring will cause the Bolt and Flat washer 7 to pop off.
Lever | Boss for Torsion spring installation |
Flat washer 7 | Frame |
Hex socket button head bolt M6
Be sure to remove this bolt first | Torsion spring 17 |
| |
for easy removal of Lever. |
|
ASSEMBLING
Do the reverse of the disassembling steps 1) - 9).
Note:
When installing Torsion spring 17 on Frame, insert the spring straight over the boss till it touches the inside wall of Frame. Be careful not to tilt the spring. (Fig. 36)
Fig. 36
Torsion spring 17 | Frame |
| Boss for Torsion |
| spring installation |