Makita LF1000 dimensions Assembling Feet Section, Installing Bracket on Square pipe

P 17/ 30

Repair

[3]DISASSEMBLY/ASSEMBLY

[3]-9. Assembling Feet Section

LEFT FEET SECTION

1)For smooth folding action of the Feet section, follow the steps described below to assemble Support bracket to Square pipes precisely at an angle of 90 degrees:

i)Put Support bracket on Square pipe 32-510, while keeping about 238 mm distance from the top of Support bracket to the top end of Square pipe. You don't need to tighten hex bolt M6x45 securely in this step.

Then while applying angle ruler to Square pipe and Support bracket, adjust the angle to 90 degrees. (Fig. 44)

ii)While keeping the 90 degrees obtained in the previous step, tighten the bolt securely to fasten Support bracket to Square pipe 32-510.

iii)Fasten Support bracket to Square pipe 32-475 as the same way you have done in the steps i) and ii).

The distance between Square pipe 32-510 and Square pipe 32-475 will be about 529mm if Support bracket is assembled correct to the two pipes. (Fig. 45)

Fig. 44 Fig. 45

	Square pipe
	32-510
approx.
283mm	Hex nut M6
	Flat washer 8

Hex bolt M6x45

Flat washer 6

Framing square

Support bracket

Square pipe	approx.	Square pipe
32-510	529mm
		32-475
	Framing square

approx. 283mm

Hex nut M6

Flat washer 8

Flat washer 6

Hex bolt M6x45

2)See Fig. 46. Mount Bracket on Square pipe 32-510 from the Support bracket installation side.

Put Pin 8 (long) through Flat washer 8, elliptic holes of Bracket and the first holes from the top of Square pipe 32-510. And secure the Pin 8 with another Flat washer 8 and Stop ring E-6. Then assemble another Pin 8 (long) in the second hole from the top of the Square pipe as illustrated below.

3)See Fig. 47. Assemble Bracket to the first hole from the top of Square pipe 32-475 as the same way you have done in the step 2). Then assemble Pin 8 (long) in the second hole from the top, and Pin 8 (short) in the third hole from the top as illustrated below.

Fig. 46 Fig. 47

Installing Bracket on Square pipe 32-510

Bracket

Support bracket

Installing Bracket on Square pipe 32-475

Bracket

Support bracket

Pin 8 (long) Flat washer 8 Sleeve 8 Stop ring E-6 Pin 8 (short)