Far area cut
009282
To trim the hedge in far area with both hands pull the switch triggers A and C.
ASSEMBLY
CAUTION:
•Always be sure that the tool is switched off and unplugged before carrying out any work on the tool.
Engage the extension cord
CAUTION: |
| |
• Make sure that the extension cord is unplugged to | ||
the mains outlet. |
| |
1 | 1. Hook complete | |
2. Tool's cord | ||
2 | ||
| 3. Extension cord | |
3 |
| |
007542 |
| |
When engaging the extension cord, secure it to the tool's cord with the hook complete. Attach the hook about 100
-200 mm from the extension cord connector. This will help prevent unintentional disconnection.
Waist cord hook
CAUTION:
•Do not attach the holder of waist cord hook to other than the extension cord. Do not attach it in a position closer to the tool beyond the hook complete. Failure to do so may cause an accident or personal injury.
•Attach firmly one hook of the hook complete to the tool's cord and the other hook of hook complete to the extension cord. Working with the tool with a sole hook only attached may cause an accident
and injury.
Using the waist cord hook helps to minimizing a risk of cutting off the extension cord unexpectedly caused by the loose extension cord.
1 |
2 |
3 |
4 |
5 |
6 |
7 |
1.Hook
2.Tool
3.Tool's cord
4.Hook complete
5.Extension cord
6.Holder
7.Waist cord hook
009278
Press in or pull out the cord through the opening of the holder.
| 1. | Holder |
1 | 2. | Cord |
2
007545
CAUTION:
•Do not force the opening of the holder. Failure to do so may cause deflection and damage to it.
6
