Installing or removing blade
CAUTION :
Always be sure that the battery cartridge is removed before installing or removing blade.
0 Insert the blade into the groove in the blade holder until the blade i s held by the two protrusions on the blade holder.
Fig. 7
CAUTION :
Always be sure that the blade is installed properly before operation.
0 To remove the blade, bend both ends of the blade up until it will slip up and over the protrusions. Then pull the blade out.
Fig. 8
CAUTION :
Replace the used blade before it i s worn down too far, or you will have difficulty in bending the ends up to remove it. I f this happens, insert a new blade between the used blade and the blade holder, hold the both blades and pull them out.