P 4/ 12
Repair
[3]DISASSEMBLY/ASSEMBLY
[3]
DISASSEMBLING
(2)After removing Motor housing R, Remove DC motor and Gear shaft complete as drawn in Fig. 3.
Fig. 3
3. Remove five 4x18 Tapping screws and | 4. Remove Gear shaft complete together with DC motor. |
Motor housing R from Motor housing L. | And separate DC motor section from Gear shaft complete. |
4x18 Tapping screw (5 pcs.) | Note: Be careful not to lose Rubber pin 4. |
| |
Motor housing R | Rubber pin 4 |
| |
Motor housing L | (2 pcs.) |
| |
| DC motor |
| Gear shaft complete |
(3)Disassemble Gear shaft complete as drawn in Fig. 4.
Fig. 4
5.Remove M4x8 Pan head screw. And then, install M4 Hex socket head bolt in preparation of the next step.
6.Receive Spool holder with 1R022 and press M4 Hex socket head bolt with 1R236. Spool holder is removed.
M4x8 Pan | M4 Hex socket |
head screw | head bolt |
Spool holder
Arbor press
1R236 
Spool holder 
Receive the bottom of
Spool holder with 1R022.
1R022
7.Holding Spur gear 48 with 1R217, press M4 Hex. socket head bolt on
Gear shaft. Spur gear 48 is removed.
Spur gear 48
1R 217
M4 Hex socket head bolt
Arbor press table | Spur gear 48 | Gear shaft |
8.Remove Ball bearing 696ZZ, Retaining ring
socket head screw from Gear shaft.
Ball bearing 608ZZ | Ball bearing 696ZZ |
M4 Hex. socket head screw
Gear shaft | Retaining ring |
|
