P 12/ 12
Wiring diagram
UR141D, UR181D
Fig. D-7
Wiring to Terminal
While facing the wire connecting portion to Pipe 25 side, connect the Lead wire (black) to Terminal. And then, connect Lead wires (red, yellow) to Terminal.
Lead wire 
Lead wire (Yellow)
Lead wire 
(red) (black)
Wire connecting portion
Pipe 25 side
Handle (L) side
Terminal
Fig. D-8
Wiring in Handle (L)
LED warning lamp
Pass Lead wires (red, yellow) between Terminal and Switch through the space between Rib A and Rib B.
Pass Lead wire (yellow) through the space between Rib A and Rib C.
Rib A | Switch |
Lead wire (red) |
|
Rib C |
|
Terminal | Rib B |
Put LED warning lamp’s lead wire (red)* on its lead wire (black) and insert them into the groove in Handle (L).
*using Lead wire (white) for some countries
Rib
Power supply cord unit
Rib | at least |
| |
| 5 mm |
Sheath
1.Come out at least 5 mm long portion of Power supply cord unit from the lower edge of Labyrinth figured lead holders.
But the sheath end must not go over Rib A.
2.Make sure that Power supply cord unit is fixed in Labyrinth figured lead holders.
