Manhattan Computer Products T2 manual Turning On The Receiver, Changing Channels

Everyday Use

3This section describes the day-to-day use of your Plaza HD•T2 receiver – how to select the channels that you want to watch, view the programme schedules, and control the basic features.

TURNING ON THE RECEIVER

Press the button on the remote control or the button on the front of the receiver. The power light on the front panel changes from red to blue when the receiver is powered up.

You can turn off the Plaza HD•T2, so it goes into standby, by pressing

the button on the remote control or the button on the receiver. When the receiver is in standby, the power light on the front panel turns red. The Plaza HD•T2 uses less power when in standby.

CHANGING CHANNELS

Step through the channels by pressing the or buttons on the remote control or the and buttons on the front of the Plaza HD•T2 receiver.

If you know the channel’s number, you can switch directly to the channel you want by using the number buttons on the remote control. As you enter a channel number, each digit appears at the top left of the screen to show the number button you have pressed.

Press the button to switch from the channel you are currently watching to the channel you were watching before.

HINT: You should leave the Plaza HD•T2 receiver plugged in with the socket switched on, at all times (except when there is lightning – see Appendix A). When you are not using the receiver, put it in standby by pressing the button on the remote control or the button on the front of the receiver.

HINT:Tosavepower,thePlazaHD•T2receiverwillautomatically switch to standby if it is not used for a long time. This feature can be disabled – see the Advanced Use section of this guide.

HINT: There are some channel numbers missing in the channel list because spaces are left for future channels to join Freeview.

HINT: If you enter a number that does not exist, the channel will not change.

14