SYSTEM MENU SECTION (continued)
Press 
to display the Manual Scan menu. Enter the UHF channel (21 - 68), frequency (474Mhz - 850Mhz) and bandwidth (7MHz or 8MHz) to be scanned. You can use the number buttons 
and 
to enter the channel, frequency and bandwidth. When ready, press 
to start scanning.
The Plaza HD•T2 will take a few seconds to complete the scan. Whilst scanning, it displays the services found so far, and when finished a list of all services found.
You can view a service from this list by highlighting it and then pressing the 
button. Channels that are not part of the default Freeview channel list for your region are added at the end of the main Freeview lists in the
Please note that when browsing channels in the EPG that are on a different platform (e.g. Saorview in Ireland), you may find that programme data is unavailable, or unavailable until you select a channel from that platform.
NETWORK CONFIGURATION
See the Connecting to Your Network section (page 32) for full details on how to set up your Plaza
5V ANTENNA POWER
Some antennas that are installed with a signal amplifier need a power supply from the receiver because they do not have their own. If you have connected such a signal amplifier, the Plaza HD•T2 can supply it with a +5V DC supply. Press 
to turn this on or off.
HINT: Almost all normal aerial installations will not require this to be turned on. Only do so if instructed to by your aerial’s user guide or your installer.
RF LOOPTHROUGH IN STANDBY
The ANT OUT output on the back of the Plaza HD•T2 is disabled in standby by default to reduce energy consumption. This means that if you have connected your TV to this output, it will not be able to get reception when the Plaza HD•T2 in standby. Press 
to turn on or off RF Loopthrough in Standby.
PARENTAL GUIDANCE
Press 
to turn on or off the parental guidance lock. This prevents
watching any programme broadcast with a 
parental guidance warning, or displaying the system menu, without first entering the lock PIN.
SET LOCK PIN
Press 
to show the set lock PIN menu. Change your PIN by first entering your current PIN and then entering and confirming your choice of new PIN.
30
