SWITCHING ON (continued)
Turn on your TV set and choose the HDMI input (see your television’s manual for guidance).
Switch on the mains socket the Plaza HD•T2 is connected to.
After a few seconds, the receiver’s first Freeview installation screen shown below will appear on the television screen:
HINT: If you do not see this screen on your television, see ‘Troubleshooting’ on page 36.
TUNING IN
When the first installation step is displayed, use the 
or 
buttons to select the screen format of your television (16:9 Widescreen
or the squarer 4:3 Traditional). Then press the 
button to highlight the HDMI Resolution selection box, and use the 
or 
buttons to select the correct resolution for your television. Press
to select the “Next” button and then press 
to display the next installation step.
12
