Dell M620 owner manual Link tuning failure detected on IO module number

Error Code Message Information

HWC5032	Message	A fabric mismatch detected on IO module <number>.
	Details	The fabric type for IOM's on the same chassis fabric must match.
	Action	Check chassis fabric type in CMC GUI and compare to the type of both IOM's.

HWC5034

HWC5036

HWC6000

HWC6002

HWC6003

HWC6004

HWC7002

HWC7004

HWC7006

Message	A link tuning failure detected on IO module <number>.
Details	Link tuning table not supported for this IO modular.
Action	Update the CMC firmware. If the issue persists, see Getting Help.
Message	A failure is detected on IO module <number>.
Details	The IOM module performance may be impacted.
Action	If the issue persists, see Getting Help.
Message	The <name> controller is offline.
Details	Information and status from the controller is unavailable.
Action	Remove and reapply input power. If the issue persists, see Getting Help.
Message	The <name> controller is stuck in boot mode.
Details	Information and status from the controller is unavailable.
Action	Remove and reapply input power. If the issue persists, see Getting Help.
Message	The <name> controller is booting.
Message	Cannot communicate with <name> controller.
Details	Information and status from the controller is unavailable.
Action	Remove and reapply input power. If the issue persists, see Getting Help.
Message	Server <number> health changed to a warning state from a normal state.
Details	Server <number> health changed to a warning state from a normal state.
Action	Review System Log or front panel for additional information.
Message	Server <number> health changed to a critical state from either a normal or warning state.
Details	Server <number> health changed to a warning state from a normal state.
Action	Review System Log or front panel for additional information.
Message	Server <number> health changed to a nonrecoverable state from a less severe state.
Details	Server <number> health changed to a warning state from a normal state.

91