Error Code Message Information
Action Check presence of the hardware, reinstall or reconnect, then reattempt the update. If the
issue persists, see Getting Help.
HWC4013 Message Hardware unsuccessfully updated for embedded NIC.
Action Check presence, reinstall or reconnect, then reattempt the update. If the issue persists, see
Getting Help.
HWC4015 Message Link Tuning error detected.
Details CMC has old firmware. After updating the firmware the CMC will recognize the device.
Action Update the CMC firmware. If the issue persists, see Getting Help.
HWC5001 Message <
name
> is offline.
Action If unexpected, check presence, then reinstall or reconnect.
HWC5002 Message A fabric mismatch detected on <
name
>.
Details The fabric type for the IOM and mezzanine cards must match.
Action Check chassis fabric type in CMC GUI and compare to the type of IOM or mezzanine card.
HWC5004 Message A link tuning failure detected on <
name
>.
Details CMC has old firmware. After updating the firmware the CMC will recognize the device.
Action Update the CMC firmware. If the issue persists, see Getting Help.
HWC5006 Message A failure is detected on <
name
>.
Action If the issue persists, see Getting Help.
HWC5008 Message Console is not available for the <
name
>.
Action If the issue persists, see Getting Help.
HWC5010 Message <
name
> cannot detect any hosts.
Action If the issue persists, see Getting Help.
HWC5014 Message <
name
> is not functional and is powered off.
Action If the issue persists, see Getting Help.
HWC5031 Message IO module <
number
> is offline.
Details The CMC has powered off the IOM.
Action If the issue persists, see Getting Help.
90