Section 2 | Installation Instructions |
Electrical Service
GENERAL
WARNING
All wiring must conform to local, state and national codes.
VOLTAGE
The maximum allowable voltage variation is ± 10% of the rated voltage on the ice machine model/serial number nameplate at
WARNING
The ice machine must be grounded in accordance with national and local electrical codes.
The 115/1/60 ice machines are factory
The 230/50/1 ice machines are factory
QM-45 ICE MACHINE
FUSE/CIRCUIT BREAKER
A separate fuse/circuit breaker must be provided for each ice machine. Circuit breakers must be H.A.C.R. rated (does not apply in Canada).
TOTAL CIRCUIT AMPACITY
The total circuit ampacity is used to help select the wire size of the electrical supply.
The wire size (or gauge) is also dependent upon location, materials used, length of run, etc., so it must be determined by a qualified electrician.
WARNING
Never use an extension cord. If an outlet is not within reach of the ice machine’s power cord, have a proper amperage outlet wired closer to the ice machine.
| Voltage | ||
Ice Machine | Phase | Maximum | Total Amps |
| Cycle | Fuse/Circuit |
|
|
| Breaker |
|
115/1/60 | 15 | 5.2 | |
| 230/1/50 | 15 | 2.6 |
For United Kingdom Only
As the colours of the wires in the mains lead of the appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:
•The wire which is coloured green and yellow must be connected to the terminal in the
plug which is marked with the letter E or by the earth ground symbol |
|
|
| or coloured | ||
| ||||||
green or green and yellow. |
|
|
|
|
|
|
|
|
|
|
|
| |
•The wire coloured blue must be connected to the terminal which is marked with the letter N or coloured black.
•The wire coloured brown must be connected to the terminal which is marked with the letter L or coloured red.
