Manitowoc Ice QM45 Series service manual ICE Thickness Check, Ice Thickness Check

Section 3 Ice Machine Operation

ICE THICKNESS CHECK

The ice thickness probe is factory-set to maintain the ice bridge thickness at 1/8” (3.2 mm).

1.Inspect the bridge connecting the cubes. It should be about 1/8” (3.2 mm) thick.

2.If adjustment is necessary, turn the ice thickness probe adjustment screw clockwise to increase bridge thickness, or counterclockwise to decrease bridge thickness.

NOTE: Turning the adjustment 1/3 of a turn will change the ice thickness about 1/16” (1.5 mm).

ADJUSTING

SCREW

1/8” (3.2MM)

ICE BRIDGE THICKNESS

SV1208

Ice Thickness Check

Make sure the ice thickness probe wire and the bracket do not restrict movement of the probe.

3-5