Section 2

Installation Instructions

 

 

Water Supply and Drain Requirements

WATER SUPPLY

Local water conditions may require treatment of the water to inhibit scale formation, filter sediment, and remove chlorine odor and taste.

Important

If you are installing a Manitowoc Arctic Pure™ water filter system, refer to the Installation Instructions supplied with the filter system for ice making water inlet connections.

AIR GAP

An air gap is incorporated into the design of the ice machine. Maximum water level is the top of the water trough, which allows a minimum 1 inch air gap.

WATER INLET LINES

Follow these guidelines to install water inlet lines:

•Do not connect the ice machine to a hot water supply. Be sure all hot water restrictors installed for other equipment are working. (Check valves on sink faucets, dishwashers, etc.)

•If water pressure exceeds the maximum recommended pressure, obtain a water pressure regulator from your Manitowoc distributor.

•Install a water shut-off valve for both the ice making and condenser water lines.

•Insulate water inlet lines to prevent condensation.

!Caution

Do not apply heat to water valve inlet fitting. This will damage plastic valve body.

DRAIN CONNECTIONS

Follow these guidelines when installing drain lines to prevent drain water from flowing back into the ice machine and storage bin:

•Drain lines must have a 1.5 inch drop per 5 feet of run (2.5 cm per meter), and must not create traps.

•The floor drain must be large enough to accommodate drainage from all drains.

•Run separate bin and ice machine drain lines. Insulate them to prevent condensation.

•Vent the bin and ice machine drain to the atmosphere. Do not vent the condenser drain on water-cooled models.

Cooling Tower Applications

(Water-Cooled Models)

A water cooling tower installation does not require modification of the ice machine. The water regulator valve for the condenser continues to control the refrigeration discharge pressure.

It is necessary to know the amount of heat rejection, and the pressure drop through the condenser and water valves (inlet and outlet) when using a cooling tower on an ice machine.

•Water entering the condenser must not exceed 90°F (32.2°C).

•Water flow through the condenser must not exceed 5 gallons (19 liters) per minute.

•Allow for a pressure drop of 7 psi (48 kPA) between the condenser water inlet and the outlet of the ice machine.

•Water exiting the condenser must not exceed 110°F (43.3°C).

Part Number 80-1560-3

2-5

Page 12 Page 14
Page 13
Image 13
Manitowoc Ice S0850M manual Cooling Tower Applications Water-Cooled Models, Water Supply, Air Gap, Water Inlet Lines
Page 12 Page 14

S0850M specifications

The Manitowoc Ice S0850M is a cutting-edge ice maker designed to meet the needs of busy commercial environments. Known for its reliability and efficiency, this machine is specifically engineered to produce high-quality ice for various applications in restaurants, bars, hotels, and other foodservice operations.

One of the standout features of the S0850M is its capacity. This model can produce up to 850 pounds of ice in a 24-hour period, making it an ideal choice for establishments that require a steady supply of ice throughout the day. The ice produced is of the cube style, which is versatile for use in beverages, food displays, and more, ensuring that it meets the demands of both front-of-house and back-of-house operations.

The Manitowoc Ice S0850M is equipped with advanced technologies that enhance its performance and energy efficiency. The unit utilizes an efficient air-cooled condenser, which allows for better heat exchange, reducing energy consumption. Additionally, its programmable slow freeze technology ensures that the ice is formed slowly, resulting in clear, high-density cubes that melt slowly, minimizing dilution of beverages.

Durability is another key characteristic of the S0850M. Constructed with stainless steel, the machine is designed to withstand the rigors of commercial use while preventing corrosion and ensuring long-lasting performance. Its compact design allows for easy installation in various locations, and it can fit well under counters or in tight spaces, providing flexibility for ice storage solutions.

For ease of use, the S0850M comes with intuitive controls that allow operators to manage production cycles efficiently. The machine also includes a built-in diagnostic system, providing real-time status updates and alerts for any maintenance needs, ensuring that the ice maker operates smoothly without unexpected downtime.

Finally, the Manitowoc Ice S0850M is designed with food safety in mind. It meets hygiene standards, preventing contamination within the ice production process. This attention to food safety and health regulations makes it a preferred choice for businesses looking for a dependable commercial ice maker.

In summary, the Manitowoc Ice S0850M ice maker combines capacity, efficiency, durability, and advanced technology to provide high-quality ice production for busy foodservice operations, ensuring that establishments can meet their ice needs effectively and reliably.
Top Page Image Contents