Section 2

Installation Instructions

 

 

Water Supply and Drain Requirements

WATER SUPPLY

Local water conditions may require treatment of the water to inhibit scale formation, filter sediment, and remove chlorine odor and taste.

Important

If you are installing a Manitowoc Arctic Pure™ water filter system, refer to the Installation Instructions supplied with the filter system for ice making water inlet connections.

WATER INLET LINES

Follow these guidelines to install water inlet lines:

•Do not connect the ice machine to a hot water supply. Be sure all hot water restrictors installed for other equipment are working. (Check valves on sink faucets, dishwashers, etc.)

•If water pressure exceeds the maximum recommended pressure, obtain a water pressure regulator from your Manitowoc distributor.

•Install a water shut-off valve for both the ice making and condenser water lines.

•Insulate water inlet lines to prevent condensation.

!Caution

Do not apply heat to water valve inlet fitting. This will damage plastic valve body.

DRAIN CONNECTIONS

Follow these guidelines when installing drain lines to prevent drain water from flowing back into the ice machine and storage bin:

•Drain lines must have a 1.5 inch drop per 5 feet of run (2.5 cm per meter), and must not create traps.

•The floor drain must be large enough to accommodate drainage from all drains.

•Run separate bin and ice machine drain lines. Insulate them to prevent condensation.

•Vent the bin and ice machine drain to the atmosphere. Do not vent the condenser drain on water-cooled models.

Cooling Tower Applications

A water cooling tower installation does not require modification of the ice machine. The water regulator valve for the condenser continues to control the refrigeration discharge pressure.

It is necessary to know the amount of heat rejection, and the pressure drop through the condenser and water valves (inlet and outlet) when using a cooling tower on an ice machine.

•Water entering the condenser must not exceed 90°F (32.2°C).

•Water flow through the condenser must not exceed 5 gallons (19 liters) per minute.

•Allow for a pressure drop of 7 psi (48 kPA) between the condenser water inlet and the outlet of the ice machine.

•Water exiting the condenser must not exceed 110°F (43.3°C).

Part Number 80-1631-3

2-5

Page 12 Page 14
Page 13
Image 13
Manitowoc Ice S1400M manual Cooling Tower Applications, Water Supply, Water Inlet Lines, Drain Connections
Page 12 Page 14

S1400M specifications

The Manitowoc Ice S1400M is a cutting-edge ice machine designed for high volume ice production, widely popular in the restaurant and hospitality industries. This model is part of Manitowoc’s acclaimed line of ice machines, known for their durability, efficiency, and innovative features that simplify ice making while enhancing operational performance.

One of the most notable features of the S1400M is its impressive production capacity. This unit is capable of producing up to 1,400 pounds of ice per day, making it a reliable choice for businesses with high ice demands. Whether it's for cocktails, beverages, or food preservation, the S1400M ensures that there is always enough ice available to meet customer needs.

The S1400M employs Manitowoc's advanced ice-making technology, which includes a state-of-the-art 100% stainless steel evaporator. This not only enhances the longevity of the unit but also helps produce cleaner and clearer ice. The unit utilizes a patented built-in actuator that completely purges the evaporator during the harvest cycle, ensuring that the ice is free from contaminants and undesirable residues.

Furthermore, the Manitowoc S1400M is designed with energy efficiency in mind. It operates with the Energy Star certification, which means it meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. This reduces operational costs and environmental impact, making the S1400M an excellent investment for eco-conscious businesses.

This model is also equipped with an intuitive ice thickness control system, allowing for customization of ice size according to specific needs. Users can easily set the machine to produce either half-cube or full-cube ice, catering to varying beverage requirements. Additionally, the S1400M features a user-friendly interface and digital display, providing operators with real-time machine status updates and alerts for maintenance or service needs.

Another important aspect of the S1400M is its flexible installation options. This unit can be paired with a variety of bins and dispensers, allowing businesses to optimize their space while ensuring the functionality of their ice supply. Its compact design is ideal for establishments with limited space, making it a versatile choice for bars, restaurants, and hotels.

In summary, the Manitowoc Ice S1400M represents the perfect blend of power, efficiency, and technological advancement. With its high production capacity, durable construction, customizable ice production, and energy-saving features, the S1400M stands out as a leading choice for any business requiring consistent and high-quality ice.
Top Page Image Contents