OPERATIONAL NOTES
SWITCHINGON
The power switch is located on the lower right hand corner of the front panel. Push the top of the rocker switch (1) to turn on the amplifier and the bottom of the rocker to turn off the amplifier.
With monoblocks we suggest that you turn on one amplifier first allowing about thirty seconds to pass before powering the other one. Also, ALWAYS turn ON your preamplifier or consule FIRST and let this settle before turning on the amplifiers.
RUNNING
It is not recommended that you leave your amplifier permanently switched on. This only wastes electricity and tube life. Your amplifier has solid state rectification and reaches peak operating condition in approximately 30 minutes.
TUBELIFE
As with all tubes, their quality degrades with age. This is due to cathode emission, a natural process found in all tubes. We recommend that you have your amplifier checked every
