NAMES AND FUNCTIONS
REAR PANEL
REMOTE CONTROL | ANALOG OUT | DIGITAL OUT | FLASHER IN |
IN | L |
|
|
EXT. INT. |
|
|
|
|
|
| |
OUT | R | COAXIAL OPTICAL | AC IN |
|
|
|
MODEL NO. CC4001
ENGLISH
A B C D E F GH
A EXT./INT. (External/Internal switch) | C REMOTE CONTROL IN/OUT (input | ||
When this unit is used as a standalone | and output) connectors | ||
component, set this switch to the INT. side. | When the remote control connectors on the | ||
When it is used connected to external | |||
unit and on a Marantz AV component are | |||
component by a remote connecting cable and | |||
connected using the accessory remote | |||
to audio component with a remote sensor that | |||
connecting cables, the components can be | |||
supports remote controls by Marantz, set this | |||
operated as a system by remote control. | |||
switch to the EXT. side. | |||
• | When connecting to a component which is | ||
| |||
Caution |
| equipped with remote control connectors, | |
| the unit’s REMOTE CONTROL IN | ||
If the unit is used as standalone and the |
| ||
| connector must always be connected to | ||
switch is set to EXT. position, remote control |
| ||
| the REMOTE CONTROL OUT connector | ||
unit cannot be used. |
| ||
| on the other component to be connected. | ||
|
| ||
B | • | When connecting a component which is | |
| not equipped with an infrared remote | ||
|
| ||
A control port for professionals (custom |
| sensor, this component must always be | |
installers). |
| connected to the unit’s REMOTE | |
|
| CONTROL OUT connector. |
DANALOG OUTPUT connectors
These are the output jacks of the analog audio signals. The supplied analog connection cord can be connected to the CD, AUX, or other connectors on an amplifier. Be sure to connect the L and R channels correctly to the corresponding jacks.
Caution
Never connect to the PHONO connector on the amplifier.
EDIGITAL AUDIO OUT COAXIAL
This jack is to be connected with a recording device, amplifier, D/A converter, etc that has coaxial digital input using an optional coaxial digital cable.
FDIGITAL AUDIO OUT OPTICAL
This jack is to be connected with a recording device, amplifier, D/A converter, etc that has optical digital input using an optional square type optical digital cable.
GFlasher Input jack
A control port for professionals (custom installers).
This is used to control the unit from other rooms using keypad, etc.
HAC Inlet
Connect the supplied power cord to this jack and a household AC power outlet.
7