ENGLISH
7Cautions on handling power cord
•Do not touch the power cord with wet hands.
•When disconnecting the power cord, always make sure that you take hold of the plug. Yanking out or bending the cord can damage it and/or cause electric shocks or a fire.
•Get into the habit of disconnecting the power plug before leaving home.
7Do not attempt repairs yourself
•Refrain from lubricating the player: doing so can cause malfunctioning.
•Only qualified engineers with specialized expertise are authorized to repair the
PRECAUTIONS
•In winter, droplets of water form on the insides of the windows of a heated room: this is called condensation. This player uses an optical lens, so the condensation may form in the following cases.
-In a room immediately after the heating has been turned on
-In a room where the humidity level is high
-When the player has been suddenly brought from a cold location into a warm room
Since, in cases like this, the track numbers may not be read and the player is prevented from operating properly, wait about 30 minutes, and then operate the player.
•This player may cause interference on a tuner or TV set. If this is the case, place it further away from the tuner or TV set.
•Compact discs have much less noise than analog records and hardly any noise is heard before play starts. Bear in mind, therefore, that if the volume control on the amplifier is set too high, you will risk damaging other audio components.
•Do not use commercially available lens cleaners, as they may damage the lens.
USING REMOTE CONTROL UNIT
7Cautions on handling batteries
Misuse of the batteries can result in electrolyte leakage, rupturing, corrosion, etc.
Bear in mind the following points when using batteries.
•Remove the batteries from the remote control unit if the unit is not going to be used for a prolonged period (a month or more).
•Do not use an old battery together with a new one.
•Insert the batteries while ensuring that their ª and · poles are properly aligned with the corresponding markings on the remote control unit.
•Batteries with the same shape may have different voltages. Do not use different types of batteries together.
•If electrolyte has leaked, thoroughly wipe the inside of the battery compartment, and then insert new batteries.
•When batteries which are no longer required are to be discarded, follow the directions (regulations) laid down by the local authorities in the area concerned for their disposal.
LOADING BATTERIES
Batteries in this remote control unit have a life of approximately 1 year under normal operating conditions. If the remote control unit is not going to be used for an extended period of time, remove the batteries. Also, if you notice that the batteries are starting to run down, replace them as soon as possible.
qRemove the battery cover.
wInsert the batteries with correct ª/· orientation.
Two
eClose the battery cover until it clicks shut.
7Remote control
Operate the remote control unit (RC4001CC) within a distance of approx. 5 m from the infrared signal reception window (remote sensor) on the front of the CD Changer.
Remote control operation may not be possible if the remote control unit’s transmitter is not pointing in the direction of the remote sensor or if there is an obstruction between the transmitter and the remote sensor.
Remote control operating range
Approx. 16.4 ft. (5m)
Remote control unit (RC4001CC)
4
