OPERATION
CONNECTING THE POWER SUPPLY AND TURNING ON
1.Plug the power cable into AC Power Input jack on the rear panel.
2.Turn on the power switch of the audio unit (amplifier, etc.) that is connected with this unit. Set the selector on the connected unit to this unit.
3.Plug the power cable into an AC outlet.
4.Turn the power on by pressing POWER ON/STANDBY button on the unit or ON button on the remote control unit.
•The unit repeats switching from ON and Standby every time the POWER ON/STANDBY button is pressed.
NORMAL PLAYBACK
STANDBYON
OPEN/CLOSE TIME DIMMER
1. 3.
1 2 3
4 5 6
7 8 9
PROGRAMRECALL
0
4.
RANDOM | AMS |
| REPEAT |
DISC 1 | DISC 2 | DISC 3 | |
DISC 4 | DISC 5 |
REMOTE CONTROLLER
RC4001CC
|
|
|
| 2. | 1. 3. |
| 4. |
| ||
|
|
|
|
|
|
| OPEN/CLOSE | PLAY | STOP | PAUSE |
|
| 5 DISC CD CHANGER CC4001 |
|
|
|
|
| |||
1 | 2 | 3 | 4 | 5 | DISC SKIP | REPEAT | RANDOM |
|
|
|
|
|
|
|
|
|
|
|
|
| LEVEL |
POWER |
|
|
|
|
|
|
|
|
| PHONES |
1.Press 0 OPEN/CLOSE button on the unit or remote control unit to open the disc tray. Hold the edge of the disc and place on the tray.
•Do not touch the back side (shiny side) of a CD.
•To play a single CD (8 cm), place the disc with the indentation at the center of the tray.
2.To set multiple discs, press DISC SKIP button on the main unit. With the turn table on the tray rotating, set the disc one by one.
3.Press 0 OPEN/CLOSE button on the main unit or remote control unit to close the disc tray.
4.When 3 PLAY button on the main unit or remote control unit is pressed, playback starts from the first track.
•At this time, “3” lights up on the display window.
•All discs are played (example)
To start playback from the disc 2 Disc 2/first track →.....→ last track
→Disc 3/first track →.....→ last track
→Disc 4/first track →.....→ last track
→Disc 5/first track →.....→ last track
→Disc 1/first track →.....→ last track
→ Stop
Caution
•Place a disc on each tray correctly. If not, the unit cannot be operated and discs may be damaged.
•Be careful not to have your finger caught when you close the tray.
If the finger is caught, press 0 OPEN/CLOSE button to open the tray.
•Do not insert a disc in the way shown as the arrow.
•Do not place any other media other than a disc on the tray.
•Do not pile up discs on a tray. Do not place more than two disc on a tray.
•Do not force to open/close the tray. Always use
0 OPEN/CLOSE button to open/close the tray.
•While the tray is open and rotating, do not touch or stop the tray with fingers.
ENGLISH
11