Marantz CDR631 Using The Recorder, Switching ON and OFF, Inserting discs, English, lights up

ENGLISH

USING THE RECORDER

The numbers between parentheses refer to the fold-out.

Switching ON and OFF Inserting discs

1Plug the power cord supplied into the MAINS connector

on the CD-Recorder, then into a mains socket.

MODEL NO.CDR631

MADE IN JAPAN

AC IN

IN

OUT

q	1	Press / (6) to open the disc tray.
		➔	lights up.
2 Press the POWER (1) button on the front of the CD-Re-	2	Insert a CD, CD-R or CD-RW in the appropriate recess in
corder to turn it on or off.		the tray, label side up.

	CD RECORDER CDR631	3 Press / (6) to close the tray.
	IR	➔	lights up, followed by	and the dis-
	Recordable		play will show the type of disc you inserted.
	ReWritable
POWER	STANDBY
	HEADPHONE	LEVEL
	0	10

w

Using the remote control

1Open the battery compartment cover.

2Insert 2 batteries (AA, LR-6 or UM-3; as supplied) as shown.

3Replace the cover.

•If a CD-R(W) is finalized it will show CD on the display.

•If CD-text is available the TITLE/ARTIST will scroll by.

Note:

-For recording it is important that the blank disc is completely free from dust particles or scratches. (see Compact Discs page 2).

-If you insert a blank or partly-recorded CD-R(W) or

unfinalized CD-R(W), the CD-Recorder will calibrate the disc for optimum recording. During this process the display will

first showand then the number of audio tracks. Calibration can take up to 30 seconds.

Note:

-We recommend you use 2 batteries of the same type and

condition.	-
- Always point the remote control directly towards the re-
corder and make sure there.
This remote control can switch “STANDBY ON/OFF” but can-
not switch “POWER ON/OFF” the CD-Recorder.
Batteries contain chemical substances, so they should be
disposed of properly.

8