Marantz CDR631 manual Manual start recording, About Auto Track and Auto Stop

RECORDING

The numbers between parentheses refer to the fold-out.

ABC DEF GHI

1 2 3

JKL MN OPQ

4 5 6

RST UVW XYZ

7

8

9

DISPLAY

SPACE

SCROLL

CD RECORDER CDR631

0

REC MODE

TR.INCR.

RANDOM

REPEAT

IR

FUNCTION

DELETE

STORE

CDR

CD

FINAL

ERASE

CANCL

MENU

Recordable

ReWritable

TIME

1

2

3

4

5

PROG

u

POWER

STANDBY

HEADPHONE

LEVEL

6

8

9

0

INPUT

TEXT

7

REC LEVEL/SELECT

0

10

PUSH ENTER

eryu	t	MENU/	ENTER
			CANCEL/
		STORE	DELETE

ENGLISH

Manual start recording

About AUTO TRACK and AUTO STOP

•AUTO TRACK is a function to increment track numbers either manually or automatically.

AUTO TRACK ON : track number will be automati- cally incremented according to the source. (See the table on page 19.)

AUTO TRACK OFF : track number can be manually incremented by pressing TR. INCR. (25) or TRACK INCR. (67).

•When AUTO TRACK is ON, you can also set AUTO STOP function.

AUTO STOP ON : the recording will be stopped auto- matically. (See the Table on page 20.)

AUTO STOP OFF : the recording has to be stopped manually.

Note:

AUTO STOP function is only activated when Manual start re- cording (REC MANUAL mode) is used.

1Make sure the disc is absolutely free of scratches and dust particles.

2Connect the cable from an external CD player to the CD- Recorder. (see INSTALLATION page 5 and 6.)

3Press INPUT (10) repeatedly until the selected external source appears on the display (depending on the connec- tion used):

➔	,	or	lights up and	,
		or	appears on the display.

4With the recorder stopped, press REC MODE (26) three times to enter the Manual Record standby mode.

➔MANUAL starts to flash and the display shows

.

•If or flashes, the digital connection is incorrect.

5Set the optimal recording level on the CD-Recorder.

1.Play the source first to set the optimal recording level on the CD-Recorder.

2.Rotate the REC LEVEL/SELCT (19) key until, on the Record/Play Level bar, all the blue segments are alight, but the red segments do not light continuously during the loudest passages.

DIGITAL RECORDING : +6dB ~ –63dB

ANALOG RECORDING: 0dB ~ –63dB

3.Stop the source.

•To record a 3-second silence at the start of a track, press 2/; (14) or ; (76) on the CD-Recorder before starting the source.

6To start recording, press 0 (12) on the CD-Recorder and immediately start the source (from Stop-mode).

The track number and recording time left appear on the display.

•If 9 (13, 81) was pressed within 3 seconds after 0 (12), no recording will take place.

•To check the elapsed recording time, press TIME (7) or DISPLAY (71). (This can also be done during the recording.)

7To stop recording, press 9 (13, 81).

•To interrupt recording, press 2/; (14) or ; (76).

After recording the display will show	for sev-
eral seconds.

Note:

The recorded sound might be distorted when you adjust the recording level to set above 0dB for digital recording and -12dB for analog recording. The default setting of recvolume for digital is 0dB and analog is -12dB when this CD-Recorder is shipped.

Important:

If you want to play the recorded CD-R disc on any regular CD player, it must first be finalized. See finalizing discs.

Finalized CD-RW discs play only on CD-RW compatible CD players.

11