ENGLISH
MENU MODE
The numbers between parentheses refer to the
Auto stop
Note:
Set Auto track increment ON, otherwise AUTO TRACK does not show on the display.
1Set stop mode.
2Press STORE/MENU (20, 77) on the deck or the remote control to enter Menu mode.
3Rotate REC LEVEL/SELECT (19) or press S (15, 74), T (16, 82) to select the AUTO STOP submenus.
appears on the display.
4Press PUSH/ENTER (19) or ENTER (78) to confirm.
5 Select Auto stop or by rotating REC LEVEL/ SELECT (19) or press S (15, 74), T (16, 82).
AUTO STOP ON : fully automatic stop.
AUTO STOP OFF : only manual stop during the recording.
6Press PUSH/ENTER (19) or ENTER (78) on the remote control to confirm.
7Press STORE/MENU (20, 77) to store setting and return to the submenu, or press 9 (13, 81) to exit.
AUTO STOP | ON | |
Source | ||
| ||
CD/MD | Stop after 3 seconds of user DATA of stop | |
(with user data) | pattern detected on the incoming source signal | |
|
| |
DAT/DCC | Stop after 20 seconds of silence | |
(with user data) |
| |
Unknow | Stop after 20 seconds of silence | |
(no user data available) |
| |
|
| |
Analog | Stop after 20 seconds of silence | |
| ||
|
| |
No source | Stop after 3 seconds of unlock | |
(no lock) |
| |
|
|
Copy protection
1Set stop mode.
2Press STORE/MENU (20, 77) to enter Menu mode.
3Rotate REC LEVEL/SELECT (19) or press S (15, 74), T (16, 82) to select the Copy submenus.
appears on the display.
4Press PUSH/ENTER (19) or ENTER (78) to confirm.
5 Select Copy , , or by rotating REC LEVEL/ SELECT (19) or press S (15, 74), T (16, 82).
Copy protection OFF:
makes this recording ‘copy permitted.’ Unlimited copies can be made by a Consumer
Copy protection ON:
makes this recording ‘copy protected.’ One ‘Home Copy of protected Original’ can be made from this recording; this copy (HCO) cannot be reproduced by a Consumer
Home Copy of Original:
make this recording a ‘Home Copy of protected Original’ (HCO) straight away. NO copy can be made from this recording by a Consumer
6Press PUSH/ENTER (19) or ENTER (78) to confirm.
7Press STORE/MENU (20, 77) to store setting and return to the submenu, or press 9 (13, 81) to exit.
Note:
-Since this
-Making an analog copy is always possible from the recorded
Balance (Only active in Record/Standby mode)
1Press STORE/MENU (20, 77) to enter Menu mode.
2Rotate REC LEVEL/SELECT (19) or press S (15, 74), T (16, 82) to select the SET BALANCE submenu.
appears on the display.
3Press PUSH ENTER (19) or ENTER (78) to confirm.
➔ | and | appear on the display. |
4Adjust the recording balance by turning the REC LEVEL/SELECT (19) or press S (15, 74), T (16, 82).
5Press PUSH ENTER (19) or ENTER (78) to confirm.
6Press STORE/MENU (20, 77) to store settings.
Note:
The balance setting will not be stored.
20