Marantz CDR631 manual Programmed play, Programming for playback, Clearing a program

ENGLISH	PROGRAMMING
	The numbers between parentheses refer to the fold-out.
	Programmed play
	• You can program up to 99 tracks to play in any desired se-
	quence.
	• Tracks can be programmed more than once, but each time
	counts as a track. (step)

Programming for playback

1Press PROG (11, 85) on the remote control to enter Pro- gram mode.

➔ PROGRAM flashes and appears on the display.

2Select the required track numbers by turning the REC LEVEL/SELECT (19) key left or right and store by pressing PUSH ENTER (19).

or:

Key in a track number with the NUMBER (9, 70). For 2- digit numbers, press the keys in rapid succession and store by pressing PUSH/ENTER (19) on ENTER (78).

➔The track will be stored in the program.

➔The track number, total program time and the number of programmed tracks (steps) are displayed.

3Repeat step 2 for all tracks to be programmed.

4Press 9 (13, 81) or PROG (11, 85) to end programming.

➔ PROGRAM lights continuously.

5 Press 2/; (14) or 2 (73) to start programmed play.

Clearing a program

1Press 9 (13, 81) if necessary to stop programmed play.

2Press 9 (13, 81) again to clear the program.

➔ PROGRAM disappears from the display.

•The program is also cleared if you open the disc tray.

Erasing a track from a program

1In Stop mode press PROG (11, 85) to enter Program mode.

2Use Q (17, 75) or R (18, 80) to select the track from which to delete.

➔The track number and program step will be shown on the display.

3Press DELETE/CANCEL (23, 79) to erase the track from the program.

➔The remaining program steps and the remaining playing time of the program will be displayed.

16