Marantz CDR631 Other Informations, Menu messages, Fixing problems, No power, No sound, Display

ENGLISH

DISPLAY

Menu messages

................... when attempting to edit text for a

disc which has no tracks

................... when entering Text Edit mode

.................... when editing or erasing an artist

name

...................... when editing or erasing a title

............... when editing or erasing an artist

name per track

................. when editing or erasing a title per

track

................. when entering Text Erase mode

...................... when entering All Text mode

...................... when confirmation for erasing has

to be given with ENTER key

........... when confirmation for erasing has

to be given with ENTER key

........... when waiting for confirmation when

erasing a disc

................... when selecting text review per

unfinalized disc in memory

........... when REVIEW is selected while no

text is in memory

............... when selecting auto track incre-

ment ON or OFF

...................................... Auto Track increment on

.................................... Auto Track increment off

.............. when selecting BALANCE

......................... no text stored for disc

OTHER INFORMATIONS

The numbers between parentheses refer to the fold-out.

Fixing problems

If you think your CD-Recorder is defective, it is wise to read this list first. Maybe you forgot a simple step.

Warning!

Under no circumstances should you attempt to repair the CD-recorder yourself as this will invalidate the guarantee.

No power

•ensure that the POWER ON/OFF (1) button is on: the CD-Recorder is in standby mode, press any button to activate it

•ensure that the power cord is plugged in correctly

•switch the recorder OFF and then immediately back ON

Auto track does not work

•check if auto track is selected

•check if there are 2.7 seconds silence in between the tracks (analog recording only)

•check if the source is consumer source with the digital output according to IEC audio standard

•source is DVD disc (no track information)

No sound

•check the audio connections

•if using an amplifier, try using a different source

Amplifier sound is distorted

•check that the CD-Recorder analog output is not con- nected to the amplifier PHONE input.

Play will not start

•ensure that the label of the CD is facing up

•clean the disc

•check that the disc is not defective by trying another disc

Remote control does not work

•point the remote control directly at the CD-Recorder

•check the batteries and replace if necessary

•select the right source first

•set the remote control selector to ‘INTERNAL’

Will not record

•clean the disc

•check if CD-R(W) is an unfinalized disc

•check that the disc is recordable and replace if neces- sary

• the disc is not an audio disc (			)
•	wrong input source chosen.
•	text memory full (	/	).

When a CD-RW has to be unfinalized for recording. Erase text for other disc(s) or finalize other disc(s) to obtain memory space.

Recording is distorted

•make sure the recording level was not too high

20 second pause between recordings

•see ‘RECORDING’ CD SYNC

22