Marantz DR6000 manual Programmed play, Programming for playback, Clearing a program

PROGRAMMING

The numbers between parentheses refer to the fold-out.

Programmed play

•You can program up to 99 tracks to play in any desired se- quence.

•Tracks can be programmed more than once, but each time counts as a track. (step)

Programming for playback

1Press PROG (72) on the remote control to enter Pro- gram mode.

➔ PROGRAM flashes and appears on the display.

2Select the required track numbers by turning the EASY JOG (12) key left or right and store by pressing PUSH EN- TER (12, 65).

or:

Key in a track number with the NUMBER (57). For 2-digit

numbers, press the keys in rapid succession.

➔The track will be stored in the program.

➔The track number, total program time and the number of programmed tracks (steps) are displayed.

3Repeat step 2 for all tracks to be programmed.

4Press STOP (17, 68) or PROG (72) on the remote control to end programming.

➔ PROGRAM lights continuously.

Clearing a program

1Press 9 STOP (17, 68) if necessary to stop programmed play.

2Press 9 STOP (17, 68) again to clear the program.

➔ PROGRAM disappears from the display.

•The program is also cleared if you open the disc tray.

Erasing a track from a program

1In Stop mode press PROG (72) on the remote control to enter Program mode.

2Use Q (19, 62) or R (18, 67) to select the track from which to delete.

➔The track number and program step will be shown on the display.

3Press CANCEL/DELETE (10, 66) to erase the track from the program.

➔The remaining program steps and the remaining playing time of the program will be displayed.

ENGLISH

5Press 2/; PLAY/PAUSE (16, 60) to start programmed play.

15

DR6000(U)_Eng_P11-21.p65 15 8/7/00, 1:37 PM