Marantz DV6400 Displays During Operation, Loading the Batteries, Using the remote control

FUNCTIONAL OVERVIEW

Display

Stays on when repeat

title function is on.

Stays on when

Stays on when repeat chapter function is on.

Stays on when repeat track function is on.

the repeat function is on.

Stays on when the A-B repeat function is on.

Stays on when the inserted

disc is being played back.

Lights up when the inserted disc comes to a pause.

Lights up when a playback control is activated.

Lights up when a DVD is inserted into the tray.

CD:

Lights up when a CD is inserted

into the tray. (The SUPER AUDIO CD Indicator also lights up when playing a Super Audio CD.)

VCD:

Lights up when a Video CD is inserted into the tray.

English

Displays how long a current title or track has been played back. When a chapter or track has switched, the number of a new title, chapter or track is displayed.

Displays During Operation

Power on

No disc inserted

Tray open

Tray closed

Loading the Disc

Power off

Loading the Batteries

1.Open the battery compartment cover.

2.Insert two “AA” (R6P) batteries, with each

one oriented correctly.

3. Close the cover.

NOTES

•Do not mix alkaline and manganese batteries.

•Do not mix old and new batteries.

Using the remote control

Keep in mind the following when using the remote control:

•Make sure that there is no obstacle between the remote and the remote sensor on the unit.

•Use within the operating range and angle, as shown.

Cautions On Batteries

•Use “AA” (R6P) batteries in this remote control unit.

•Replace the batteries with new ones approximately once a year, though this depends on the frequency with which the remote control unit is used.

•If the remote control unit does not operate from close to the main unit, replace the batteries with new ones, even if less then a year has passed.

•The included battery is only for verifying operation. Replace it with a new battery as soon as possible.

•When inserting the batteries, be careful to do so in

the proper direction, following the and marks in the remote control unit’s battery compartment.

•To prevent damage or battery fluid leakage:

•Do not use a new battery with an old one.

•Do not use two different types of batteries.

•Do not short-circuit, disassemble, heat or dispose of batteries in flames.

•Remove the batteries when not planning to use the remote control unit for a long period of time.

•If the batteries should leak, carefully wipe off the fluid from the inside of the battery compartment, then insert new batteries.

– 11 – EN