HOOK UPS

The following show examples of connections commonly used to connect the DVD player either TV and other components.

If using this DVD player to playback a DVD in a 5.1 channel Dolby Digital surround or DTS surround format, the DVD player outputs a Dolby Digital or DTS data stream from its OPTICAL or COAXIAL DIGITAL AUDIO OUT jacks. 5.1 channel Dolby Digital Surround sound and DTS sound can also be output from the 5.1 CH OUTPUT jacks. By hooking the player up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound of a professional standard, which can be heard in movie theaters. Use an audio coaxial or optical digital cable (not included) for the audio connections. Use audio cables (commercially available ) for the 5.1 CH audio connection.

Notes

¡Be sure to turn off the power to all components in the system before connecting another component.

¡Refer to the Instruction Manuals for your TV, stereo system and any other components to be connected to the DVD player.

Connection to an audio system

English

Method 1

Stereo system

AUDIO Audio Input Jacks

DVD Analog Audio Out

Method 1 DVD Player + Stereo system

Method 2 DVD Player + Dolby Digital decoder or DTS decoder

Method 2

Dolby Digital decoder

or

DTS decoder

Digital Audio Input

Jacks

Digital Audio Out

NOTES

If output Dolby Digital audio, connect to a Dolby Digital decoder, and set Dolby Digital to ON for audio output in the setup mode. (See page 26)

If output DTS audio, connect to a DTS decoder, and set DTS to “DTS” for audio output in the setup mode. (See page 26)

Unless connected to a Dolby Digital decoder or a DTS decoder, set Dolby Digital to “OFF”, or DTS to “PCM” for audio output in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers. (See page 26)

The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DAT deck.

Set Dolby Digital “OFF” and set DTS to “PCM” for audio output in the setup mode for method 1 only. Playing a DVD using incor- rect settings may generate noise distortion, and may also damage the speakers. (Refer to page 26 to set Dolby Digital “ON” and to set DTS to “DTS”)

Super Audio CD sound is not output from the 2ch AUDIO OUT jacks.

Super Audio CD sound is not output as digital sound.

Optical cable (not supplied)

Optical cable (not supplied) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a diame- ter of 15 cm or more when storing them.

Use a cable which is 3m or shorter.

Insert cable plugs firmly into the connectors when making connections.

If a plug has minor scratches or is dirty, clean it with a soft cloth before inserting it into a connector.

– 13 –

EN

Page 13
Image 13
Marantz DV6400 manual Method, Connection to an audio system, Stereo system Audio Audio Input Jacks DVD Analog Audio Out