Marantz DV6400 manual DVD-A MP3 Jpeg WMA, Repeat, Program

PLAYING A DISC

Repeat		NOTES:
		• The A-B repeat section can only be set within the current
The REPEAT button is available only during playback.		title (for DVDs), or current track (for Audio CDs).
		• A-B Repeat is not available with some scenes in DVD.
REPEAT TITLE / CHAPTER		• To cancel the A point which was set, press the CLEAR button.
		• A-B Repeat playback does not function during title, chap-
	DVD-V	ter, track or all repeat playback.

English

To activate the repeat function, press the

REPEAT button during playback.

•The repeat mode changes as described below every time you press the button.

OFF	CHAPTER	TITLE
(repeat off)	(current chapter repeat)	(current title repeat)

Program

CD	SUPER
	AUDIO CD

You may determine the order in which tracks will play.

1In stop mode, press the MODE button.

NOTES:

•Repeat Title/Chapter is not available with some scenes.

•he REPEAT setting will be cleared when moving to other title or chapter.

REPEAT TRACK

•The PROGRAM screen will appear.

2 Press the cursor buttons

(▲ or ▼) to select a track, then press the ENTER button.

•Press the CLEAR button to erase the most recently entered pro- gram.

3Press the PLAY button to play the programmed tracks.

PROGRAM

TOTAL

ENTER

PLAY

CLEAR

CD	SUPER	VCD
	AUDIO CD

To activate the repeat function, press the REPEAT button during playback.

•The repeat mode changes as described below every time you press the button.

OFF	TRACK	ALL
(repeat off)	(current track repeat)	(entire disc repeat)
NOTES:

•The REPEAT setting will be cleared when moving to other track.

•Repeat playback does not function during A-B repeat playback.

•Repeat playback is not available when playing the Video CD with PBC function.

NOTES:

•While the program is being played back, the STOP button works as follows.

•Press the STOP button once and then the PLAY button again, playback will restart from the point where the STOP button was pressed. (Program continued)

•Press the STOP button twice and then the PLAY button again, playback will restart from the track in the usual way. (Program cleared)

•Up to 99 programs can be entered.

•If you wish to repeat the current track in the program, press

the REPEAT button repeatedly until TRACK appears dur-

ing playback. If you wish to repeat the entire program press

the REPEAT button repeatedly until ALL appears during playback.

•Refer to page 22 for program playback of MP3, WMA, and JPEG.

DVD-A MP3 JPEG WMA

OFF TRACK GROUP ALL

(repeat off)	(current track	(current folder	(entire disc
	repeat)	repeat)	repeat)

A-B REPEAT

		DVD-A
1	In stop mode, press the MODE
	button twice.	PROGRAM
	• The group selection screen will
	appear.
		ENTER
		PLAY
		CLEAR

2 Press the cursor buttons (▲ or ▼) to select a

group, then press the ENTER button.

DVD-A DVD-V CD

1Press the A-B REPEAT button at your

chosen starting point.

• A- appears briefly on the TV screen.

2Press the A-B REPEAT button again at your chosen end point.

•A-Bappears briefly on the TV screen, and the repeat sequence begins.

3To exit the sequence, press the A-B REPEAT button.

SUPER	VCD
AUDIO CD

A -

A - B

OFF

	• The track selection screen will be displayed.
	• It takes approximately five seconds until the track
	selection screen appears.
3	Press the cursor buttons (▲ or ▼) to select a
	track, then press the ENTER button.
	• Press the s button to go back to the group selection
	screen from the track selection screen.
4	Press the PLAY button to play the programmed
	tracks.

NOTES:

•It may take time for all the respective track times to be displayed.

•The programmed content is retained until the power is turned off or the disc tray is opened.

•If eight or more tracks have been set in a program, the user can switch the right part of the screen with the SKIP button H or G.

– 19 – EN