Table of Contents |
|
Safety Instructions | 2 |
Thank You and Please Take a Moment | 2 |
Technical Assistance and Customer Service | 2 |
Table of Contents | 3 |
Important, Connector and Cable Information | 4 |
Dimensions | 5 |
Installation Overview | 5 |
Installation | |
Alignment | 9 |
Specifications | 10 |
Warranty | 11 |
Important Information
CAUTION: The lenses contained in this product are extremely delicate precision op- tics, and may be scratched or other- wise damaged by physical contact with external objects of any kind. It is therefore essential to avoid any such contact, or any other mistreatment of the lenses. Scratches or other exter- nally caused damage to lenses that are deemed to have arisen through neglect or misuse, are excluded from protection under the Marantz Limited Warranty.
1.The LN9101M Power Supply Adapter should not be connected to the LN9101M Motorized Sled or to the AC Power Wall Outlet until the physical mount- ing of the Marantz
2.For additional connection information, refer to the owner’s manual(s) for any component(s) connect- ed to the LN9101M Anamorphic Lens System.
3.The LN9101M Anamorphic Lens is designed to produce the best possible images when a curved Anamorphic Projection Screen is used, contact your Marantz Dealer for additional information.
4.The Anamorphic Lens is a precision optical device with special coatings just like you would find on Professional Cameras. In the event the Lens re- quires cleaning to remove airborne particles such as dust and dirt from the Lens, use a safe cleaning product such as a clean and dry 3MTM Scotch- Brite® Microfiber Lens Cleaning Cloth. At no time should ordinary household cleaning products be used to clean the Lens, as damage will occur.
5.To protect the lens surfaces from accidental dam- age during the installation process DO NOT RE-
MOVE THE LENS COVERS UNTIL INSTRUCT- ED.
6.The LN9101M Motorized Sled uses bearings made from specialized permanently lubricated materials. Keep the rail linear bearing clean, dry, and con- taminant free. Do not apply any lubricants to the Motorized Sled as this will gum up the mechanism and possibly produce a film on the projector and anamorphic lenses.
In case the LN9101M Sled is accidentally soiled (i.e. spilled soda), clean all contaminants with distilled water first and allow it to dry. Then wipe it down with denatured alcohol. The LN9101M should never be operated unless the mechanism is com- pletely dry, as it relies upon clean and dry rails to operate smoothly.
7.The assembly and adjustemnt of LN9101M/EXT10/ MT20 will require a Phillips head screw driver, ad- justable wrench, 5/32 and 3/16 allen tools.
8.When the symbol illustrated here is located on
the product or on the packaging, it
indicates the product must not be disposed of with your other household
waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated col-
lection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please con- tact your local city office, your household waste disposal service or the Marantz Dealer where you purchased the product.
Connector and Cable Information
Trigger Connectors
The LN9101M Trigger In/Out Jacks Receive/Send a +12VDC Signal to Activate/
Deactivate the Anamorphic 
Lens. A 1/8 inch (3.5mm)
stereo mini phone plug is used
for connections.
IR Connectors
The LN9101M IR In Port uses a 2.5mm quad mini phone plug and allows connec-
tion of other brand IR Receivers 
to the LN9101M.
+5V
Gnd
NC
4
