Marantz PM-11S3 Using headphone set, Switching the illumination lamp setting, Muting the sound

Starting playback

Muting the sound

Sound can be muted temporarily.

Press ATT.

“ATT” appears on the display and the sound is muted.

•To restore the sound, press the button

again.

nnHow to Set Attenuation Level

•Attenuation level can only be set using ATT on the unit.

•The attenuation level can be set at –20 dB, –40 dB, or –∞.

•The factory default setting is –20 dB.

1Press and hold ATT on the unit for 2 seconds or longer.

The attenuation level will appear on the display.

2Press ATT on the unit.

•Each time the button is pressed, the attenuation level changes as follows:

–20 –40 –00 (– ∞)

•If not operated for 2 seconds, the current setting is saved and the display returns to normal.

Using headphone set

Plug headphones into PHONES jack.

•When using headphones, turn off the speaker output using

SPEAKERS A/SPEAKERS B.

•To prevent hearing loss, do not raise the volume level excessively when using headphones.

ENGLISH

Switching the illumination lamp setting

The illumination lamps on the both sides of the unit main panel can be turned on or off.

Press and hold DISPLAY on the unit for 2 seconds or longer.

The on/off setting changes as follows with each press of the button.

On	Off
(Factory default)

Getting started Basic connections Basic operation Advanced connections Advanced operation Explanation terms Troubleshooting Specifications Index

13