ENGLISH
Adjusting the levels
Starting playback
Adjusting the tone
nnLeft and right channel balance
The volume level of the left and right channels can be trimmed in 0.5 dB steps across a 0.0 – 9.0 dB range. When the unit is shipped from the factory, the volume level is set to 0.0 dB (maximum).
1 Press MENU.
The unit enters the level adjustment mode.
• The left channel level value flashes.
2 Press df to adjust the left channel level.
nnLow frequency range
The low frequency range can be trimmed in 2 dB steps across a
1 Press MENU.
The unit enters the level adjustment mode.
2 Press ENTER.
The adjustment mode selects the low frequency range.
nnHigh frequency range
The high frequency range can be trimmed in 2 dB steps across a
1 Press MENU.
The unit enters the level adjustment mode.
2 Press ENTER twice.
The adjustment mode selects the high frequency range.
3 Press 1.
The adjustment mode selects the right channel.
•The tight channel level value flashes.
4 Press df to adjust the right channel level.
5 Press MENU.
The unit exits the adjustment mode.
•If you have connected a “SLAVE” device using the F.C.B.S. connection (vpage 14), proceed to the slave setting.
3 Press df to adjust | the level. |
|
|
|
|
| ||
3 Press df to adjust | the level. |
|
| |||||
|
|
|
|
|
|
| ||
|
|
| ||||||
|
|
|
|
|
|
|
| |
• If not operated for 15 seconds, the current setting is saved |
|
|
|
| ||||
• If not operated for 15 seconds, the current setting is saved | ||||||||
and the display returns to normal. | ||||||||
and the display returns to normal. | ||||||||
|
|
|
| |||||
|
|
|
|
|
|
|
| |
|
|
|
| NOTE | ||||
|
|
|
| Before making the adjustment for level and tone, press MODE/ | ||||
|
|
|
| AMP to set its control mode to amplifier. | ||||
12
