Marantz SR5009 owner manual Dynamic Compression, Low Frequency Effects, DB 0 dB Default 0 dB

Contents Connections Playback Settings Tips Appendix

oDynamic Compression

Compress dynamic range (difference between loud and soft sounds).

Auto:	Automatic dynamic range compression
	on/off control according to source.
Low / Medium / High:	These set the compression level.
Off:	Dynamic range compression is always off.

0“Auto” can only be set when Dolby TrueHD signals are input.

0The default setting is “Off”. When the input signal is Dolby TrueHD source, the default setting is “Auto”.

oLow Frequency Effects

Adjust the low frequency effects level (LFE).

nWhen “Input Mode” is set other than to “7.1CH IN”

-10 dB – 0 dB (Default : 0 dB)

nWhen “Input Mode” is set to “7.1CH IN”

0 dB / +5 dB / +10 dB / +15 dB (Default: +10 dB)

For proper playback of the different sources, we recommend setting to the values below.

0Dolby Digital sources : 0 dB

0DTS movie sources : 0 dB

0DTS movie sources: -10 dB

Front panel Display Rear panel 153 Remote Index