Marantz SR5009 Listening to FM/AM broadcasts, Press Option, TV screen H, Display of this unit H

Contents	Connections	Playback	Settings	Tips	Appendix
			5 Use o p to select “FM” or “AM”, then press ENTER.
Listening to FM/AM broadcasts

1

2

Connect the antenna. (“Connecting an FM/AM antenna” (v p. 50))

Press TUNER to switch the input source to “Tuner”.

G TV screen H

TUNER

STEREO AUTO

Now Playing

CH 1	FM 92.10MHz
TUNE+/- Tune	CH / Preset	OPTION Option

G Display of this unit H

FM: When listening to an FM broadcast.

AM: When listening to an AM broadcast.

6Press TUNE + or TUNE - to select the station you want listen to.

Scanning is performed until it finds an available radio station. When it finds a radio station, it stops the scan automatically and tunes in.

The modes for receiving FM broadcasts consists of “Auto” mode that automatically searches available broadcast stations and “Manual” mode that lets you tune in using buttons to change the frequency. The default setting is “Auto”. You can also use “Direct Tune” to tune in by entering the frequency directly.

In “Auto” mode, you cannot tune in to radio stations if the reception is not good. If this is the case, then use the “Manual” mode or “Direct Tune” mode to tune in.

Operation buttons	Function
TUNE +, –	Selects the radio station (up/down)
CH/PAGE d f	Selects preset radio stations

3

4

Press OPTION.

The option menu screen is displayed.

Use ui to select “FM/AM”, then press ENTER.

This displays the reception band input screen.

Front panel Display Rear panel 74 Remote Index