Marantz SR5009 owner manual Stopping Audyssey Setup

Contents Connections Playback Settings Tips Appendix

8Move the Sound calibration microphone to position 2, select “Continue”, then press ENTER.

The measurement of the second position starts. Measurements can be made in up to eight positions.

Audyssey Setup

Place the microphone ear level at the 2nd listening position, which should be no more than 2 ft (60cm) away from the 1st position, then select “Continue”...

Ear Height

Back Complete Continue

To skip measuring the second and subsequent listening position, press o to select “Complete” and press ENTER to proceed to step 11.

9Repeat step 8, measuring positions 3 to 8.

10 Select “Complete”, then press ENTER.

Audyssey Setup

Measurements complete.

Select Continue to analyze the data...

Repeat Last Test Continue

Start the analysis and storage of the measurement results.

0Analysis takes several minutes to complete.

The more speakers and measurement positions that there are, the more time it takes to perform the analysis.

nStopping Audyssey® Setup

A Press BACK to display the popup screen. B Press o to select “Yes”, then press ENTER.

NOTE

When the measurement results are being saved, make sure the power is not turned off.

Front panel Display Rear panel 183 Remote Index