Marantz SR5009 owner manual Select Start, then press Enter, Channel Select

Contents Connections Playback Settings Tips Appendix

3Connect the Sound calibration microphone to the SETUP MIC jack of this unit.

When the Sound calibration microphone is connected, the following screen is displayed.

Audyssey Setup

Your AV receiver can automatically measure the acoustics of your room then optimize your speakers using the included microphone and microphone stand.

Set the following items if necessary.

Amp Assign

Channel Select

Check Results

Restore...

4Select “Start”, then press ENTER.

Audyssey® Setup can also make the following settings. 0 Amp Assign

The signals output from the SURROUND BACK speaker terminals can be switched in accordance with your speaker environment. (“Amp Assign” (v p. 188))

0 Channel Select

If channels that are not to be used are set in advance, measurement for the set channels is skipped, and measuring time can be reduced. You can also change the number of surround back speakers and subwoofer.

5Follow the instructions on the screen display and press “Next” to proceed further.

Start

Front panel Display Rear panel 181 Remote Index