ENGLISH

OTHER FUNCTION

TV AUTO ON/OFF FUNCTION

This function allows the component connected to the TV-VIDEO in jack to control the power (ON/ OFF) to the SR7400.

ATTENUATION TO ANALOG INPUT

SIGNAL

PREV

 

MUTE

 

GUIDE

 

MENU

 

EXIT

TEST

CH.SEL

SURR

1

2

3

7.1CH

ATT

SPK-AB

4

5

6

VIDEO ON/OFF

When no video signal is connected to the SR7400 or a DVD, etc., is connected directly to your TV, the unnecessary video circuit can be turned off by selecting the “VIDEO OFF” setting.

To select video off, press the AMP button and press the > button until PAGE4 is displayed. Press the V-OFF (D4) button.

SELECTING ANALOG AUDIO INPUT

OR DIGITAL AUDIO INPUT

M

D1

D2

D3D3

D4

PAGE4

AUTO POWER ON

1. Be sure the TV auto mode is ENABLED. (Refer page 19 : System Setup)

2. Connect your TV TUNER (etc) to the TV-VIDEO in terminal. Be sure to connect the VIDEO input.

3. Turn OFF the power to the TV TUNER and the SR7400.

4. Turn ON the TV TUNER and tune in a receivable station.

5. When the station is received, the SR7400 turns ON and TV is selected automatically.

DISP

OSD

SLEEP

7 8 9

CLEAR0 MEMO

If the selected analog audio input signal is greater than the capable level of internal processing, the “PEAK” indicator will light up on the front display. If this happens, you should press the ATT button on the remote.

ATT” indicator will be illuminated when this function is activated. The signal-input level is

UND RECEIVER SR7400

CLEAR

MEMORY

TUNING

F/P

MODE

TER

TV

DVD

VCR1

DSS/VCR2

AUX1

CD-R

TAPE

CD

TUNER

ONES

M

D1

D2

D3

D4

PAGE4

D5

TUNER CD CD-R MD

TAPE AUX1 AUX2 AMP

LIGHT

12

RC1400

Learning Remote Controller

D5D5

TUNER CD CD-R MD

TAPE AUX1 AUX2 AMPAMP

LIGHT

12

RC1400

Learning Remote Controller

If you have already assigned the digital inputs, you can temporarily select the audio input mode for each input source as following procedures.

Press the AMP button and press the > button until PAGE4 is displayed. Press the A/D (D3) button. When this button is pressed, the input mode is

AUTO POWER OFF

1. In the above situation, turn the TV TUNER OFF or select a channel that does not contain any broadcast.

2. The power to the SR7400 switches to STANDBY after approx. 5 minutes.

Notes:

reduced by about half. Attenuation will not work with the output signal of TAPE-OUT, CD-R/MD- OUT, VCR1-OUT and DSS/VCR2-OUT.

This function is memorized for each individual input source.

LISTENING THROUGH HEADPHONES

DISPLAY MODE

AV SURROUND RECEIVER SR7400

CLEAR

MEMORY

TUNING

F/P

ENTER

TV

DVD

VCR1

DSS/VCR2

AUX1

CD-R

TAPE

CD

PREV

 

MUTE

 

GUIDE

 

MENU

 

EXIT

TEST

CH.SEL

SURR

1

2

3

7.1CH

ATT

SPK-AB

4

5

6

DISP

OSD

SLEEP

7

8

9

switched in the following sequence.

Digital Auto Digital Analog Digital Auto....

In Digital Auto mode, the types of signals being input to the digital and analog input jacks for the selected input source are detected automatically.

If no digital signal is being input, the analog input jacks are selected automatically.

In Digital mode, input is fixed to an assigned digital

PHONES

AUTO POWER OFF is canceled if the SR7400 is set to a source other than TV.

The function reactivates when TV is selected again.

Some TV broadcasts may cause the TV AUTO FUNCTION to turn ON.

The S-Video terminal does not support “TV AUTO ON/OFF” function.

This jack may be used to listen to the SR7400’s output through a pair of headphones. Be certain that the headphones have a standard 1/4" stereo phono plug. (Note that the speakers will automatically be turned off when the headphone jack is in use.)

AV SURROUND RECEIVER SR7400

SELECTOR

CLEAR0 MEMO

You can select the display mode for the front display of the SR7400.

To select this mode, press the DISP. on the remote control.

input terminal.

In analog mode, the analog input jacks are selected. This selecting is temporary, so the result will not be stored in memory.

If you need to change the input mode completely, use SYSTEM SETUP in OSD menu system. (see page 18)

CLEARMEMORY

SELECT

ENTER

TV

DVD

VCR1

DSS/VCR2

POWER ON/STANDBY

PHONES

Notes:

When using headphones, the surround mode will change to STEREO and TruSurround (TS) headphones by SURROUND MODE selector.

The surround mode returns to the previous setting as soon as the plug is removed from the jack.

When this button is pressed, the display mode is switched in the following sequence.

Surround Mode Auto-display Off Display Off Input Function Surround Mode....

In Auto display off mode, the display is off. But, if you make a change to the unit such as input or surround mode, the display will show that change, then go back to off after about 3 seconds. When changing the volume, it is not displayed.

In Display off mode, the display is off completely.

Notes:

Only the DISP indicator will be illuminated on the front display in display off condition

26

Page 29
Image 29
Marantz SR7400 manual Other Function

SR7400 specifications

The Marantz SR7400 is a distinguished audio receiver designed to provide an excellent home theater experience. Launched in the early 2000s, the SR7400 has maintained its reputation as a premium choice for audiophiles and home cinema enthusiasts due to its robust build and extensive feature set.

One of the main highlights of the SR7400 is its 7.1-channel amplification, capable of delivering a powerful and engaging sound experience. Rated at 90 watts per channel, it ensures ample output for most home environments, making it suitable for both movies and music alike. The receiver supports a variety of surround sound formats, including Dolby Digital, DTS, and Pro Logic II, enabling users to enjoy dynamic audio from their favorite media.

The SR7400 is equipped with advanced circuitry, including Marantz's proprietary HDAM (Hyper Dynamic Amplification Module) technology. This innovation enhances audio performance by minimizing distortion and improving signal clarity. The design emphasizes a high current capability, providing a lively and detailed sound stage, essential for engrossing home theater experiences.

Another significant feature is the SR7400's multi-room capability, allowing different audio sources to be played in separate zones of the house. This flexibility makes it ideal for larger homes where the desire for sound in multiple rooms is a common preference.

In terms of connectivity, the receiver boasts a comprehensive array of inputs and outputs, including multiple HDMI inputs, digital coaxial and optical connections, as well as traditional analog inputs. This versatility allows for seamless integration with various audio and video components, such as DVD players, gaming consoles, and streaming devices.

Additionally, the SR7400 supports the Audyssey MultEQ, an automatic calibration system that optimizes the audio settings based on the room's acoustics. This feature ensures that listeners experience balanced sound regardless of their positioning within the space.

In conclusion, the Marantz SR7400 combines cutting-edge technology with user-friendly features, making it a remarkable choice for anyone looking to enhance their home audio experience. With its powerful amplification, advanced audio processing capabilities, and versatile connectivity options, it remains a sought-after receiver for a truly immersive sound experience.