MANUAL TUNING | (FM) TUNING MODE (AUTO STEREO OR MONO) |
1. To select FM , press the TUNER button on the
ENGLISH
3.2. 1.
F/P
DVD | CD |
SOURCE
PAGE 2
M
D1
D2
D3
D4
D5
3.
|
|
|
|
| VOLUME |
3. |
|
|
| DOWN | UP |
G |
| F/P |
| MODE |
|
2. |
|
|
|
| MUTE |
TAPE | CD | TUNER |
|
AUX1 INPUT
PAGE 1
CH
M
D1
D2
D3
D4
D5
VOL
front panel.
2. While pressing the MEMORY button, press the TUNING 
button up.
“AUTO PRESET” will appear on the display, and scanning starts from the lowest frequency.
3. Each time the tuner finds a station, scanning will pause and the station will be played for
TUNER CD
TAPE AUX1 AUX2 AMP
LIGHT
12
RC1400
Learning Remote Controller
1.
TV DVD VCR
TUNER CD
TAPE AUX1 AUX2
DSS
MD
AMP
five seconds.
During this time, the following operations are possible.
BASIC OPERATION
(TUNER)
LISTENING TO THE TUNER
Frequency scan step for AM is selectable. Default setup is 10 kHz step, if your country’s standard is 9 kHz step, Press TUNER button on the remote more than 6 seconds. Scan step will change.
Note:
•Preset memory for the tuner will clear by changing this setup.
(Using the SR7400)
1. To select tuner and desired band (FM or AM), press the TUNER button on the front panel
2. Press the F/P (Frequency/Preset) button on
front panel, to have the frequency appear on the
When in the auto stereo mode, AUTO indicator will be illuminated on the display.
The “ST” indicator is illuminsted when a stereo broadcast is tuned in.
At open frequencies, the noise is muted and the “TUNED” and “ST” indicators are not illuminated.
The band can be changed by the TUNER button.
4. If no button is pressed during this period, the current station is memorized in location Preset 02.
If you wish to skip the current station, press the
AUTO TUNING
3.2. 1.
F/P
DVD | CD |
SOURCE
PAGE 2
M
D1
D2
D3
D4
D5
3.
3.
2.
display.
3. Press the TUNING
or
buttons.
(Using the remote control unit)
1. To select tuner and desired band (FM or AM), press the TUNER button twice within two seconds on the remote.
2.
If the signal is weak, it may be difficult to tune into the station in stereo. In such a case, press the MODE button on the front panel.Or press the TUNER button and press the the > button until PAGE1 is displayed. Press the
“AUTO” indicator is not illuminated, if FM stereo broadcasts are received in monaural and the “ST”
TUNING 
button during this period, this station is skipped and auto presetting continues.
5. Operation stops automatically when all 50 preset memory positions are filled or when auto scanning attains the highest end of all bands. If you desire to stop the auto preset memory at anytime, press the CLEAR button.
TUNER | CD | MD | 1. | |
TAPE | AUX1 | AUX2 | AMP | |
|
| LIGHT |
| |
1 |
|
| 2 |
|
|
| RC1400 |
|
|
Press the > button until PAGE2 is displayed
3. Press the SCAN+ (D1) or SCAN– (D2) button
to tune in the deseired station.
indicator is not illuminated.
To return to auto stereo mode, press the MODE button or press
MANUAL PRESET MEMORY
Learning Remote Controller |
(Using the SR7400)
1. To select tuner and desired band (FM or AM), press the TUNER button on the front panel.
2. F/P button on the front panel to display the frequency.
3. Press the TUNING
or
button on the front panel for more than 1 second to start the Auto tuning function.
4. Automatic searching begins then stops when
DIRECT FREQUENCY CALL
PREV |
| MUTE | 2. |
| GUIDE |
| |
MENU |
| EXIT | |
TEST | CH.SEL | SURR |
|
1 | 2 | 3 | 3. |
7.1CH | ATT | ||
4 | 5 | 6 | |
DISP | OSD | SLEEP | |
7 | 8 | 9 |
|
CLEAR | 0 | MEMO |
|
AUTO indicator is illuminated the display.
PRESET MEMORY
With this unit you can preset up to 50 FM/AM stations in any order.
For each station, you can memorize the frequency and reception mode if desired.
AUTO PRESET MEMORY
2. 4. |
|
|
| 3. | |||
RECEIVER SR7400 |
|
|
|
|
|
|
|
| CLEAR | MEMORYMEMORY |
| TUNINGTUNING |
| F/P | M |
TV | DVD | VCR1 | DSS/VCR2 | AUX1 | TAPE | CD | |
S |
|
|
|
|
|
|
|
PREV |
| MUTE |
|
| GUIDE |
|
|
MENU |
| EXIT |
|
TEST | CH.SEL | SURR |
|
11 | 22 | 33 | 3. |
7.1CH | ATT | ||
44 | 55 | 66 | |
DISP | OSD | SLEEP | |
77 | 88 | 99 | 2. |
CLEAR | 00 | MEMOMEMO |
a station is tuned in.
TUNER CD
(Using the SR7400)
(Using the remote control unit)
1. To select tuner and desired band (FM or AM), press the TUNER button twice within two seconds on the remote.
2. Press the > button until PAGE2 is displayed.
3. Press and hold the SCAN+ (D1) or SCAN–
(D2) button for 1 second or more.
4. Automatic searching begins then stops when a station is tuned in.
If tuning does not stop at the desired station, use to the “Manual tuning” operation.
TAPE AUX1 AUX2 AMP | 1. |
LIGHT
12
RC1400
Learning Remote Controller
1. To select tuner and desired band (FM or AM), press the TUNER button twice within two seconds on the remote.
2. Press the GUIDE on the remote, display will show “FREQ - - -
3. Input your desired station’s frequency with the ten numbered keypad on the remote.
4. The desired station will automatically be tuned.
This function automatically scans the FM and AM band and enters all stations with proper signal strength into the memory.
5. | 2. | 2.4. | 1. 3. |
UP
TV | CD |
AUX1 INPUT
1. Tune into the radio station you desire (Refer to the “MANUAL TUNING” or “AUTO TUNING” section).
2. Press the MEMORY button on the front panel. “–
3. Select the preset number by pressing the TUNING
or
button, while this is still blinking (approx. 5 seconds)
4. Press the MEMORY button again to enter. The display stops blinking.
The station is now stored in the specified preset memory location.
28
