ENGLISH
,MUTE button
This button is used to mute the audio for the SR7400 and television.
Note:
(8) OSD button
When this button is pressed, the current setting are displayed on the TV monitor.
(9) SLEEP (sleep timer) button
⁄8PREV (Previous) button
This button is used to return to the previous channel on the television or other device.
Note:
LCD INDICATORS
Information about currently selected source and direct code names are displayed on the LCD.
•Set the AMP mode to use this button with the SR7400.
.GUIDE button
This button is used to display the menus for the DVD player, DSS (satellite broadcasting tuner), or other AV equipment.
⁄0EXIT button
(when AMP mode is selected)
This button is used to cancel settings in the setup menu.
This button is used for setting the sleep timer. It can be operated the same way as the button in unit.
⁄2MEMO button
This button is used to store settings to memory or program a source.
⁄3CONTROL button
Thses buttons are used when operating the PLAY, STOP, PAUSE, and other commands of a source.
Note:
• This button is unavailable for the SR7400.
• This button is unavailable for SR7400.
⁄9CH (Channel) button
This is used to change channels.
¤0CURSOR buttons
These buttons are used when controlling the cursor of the SR7400, DVD, or other AV equipment.
¤1LCD
Information about the sources and modes are shown on the LCD.
J I H G
F E
LEARN
NAME
MACRO
USE
A
B
PAGE 1 2 3 4 C
⁄1Numeric buttons
These buttons are used to switch between 0 to 9 of the source components. If the source is set to the amplifier, these buttons are used to perform operations.
(when AMP mode is selected)
(1) TEST button
Used to enter the test tone menu.
(2) CH SEL. (channel select) button
Used to call up SETUP MAIN MENU and adjust speaker levels or 7.1 ch input level.
(3)SURR (surround) button Used to select the surround mode.
(4)7.1CH IN button
Press this button to select the output of an external multi channel decoder.
(5) ATT button
When the input signal is too high and the voice dis- torts even by throttling the SR7400 VOLUME con- trol, turn on this function. “ATT” is indicated when this function is activated.
The input level is reduced. Attenuator is invalid for use with the output signal of “REC OUT”.
Note:
•This function is unavailable during the digital input is selected.
(6)
Speaker mode is switched in the following sequence.
A → B → A+B → off
(7) DISP. button
Selects the display mode for the front display of the SR7400.
⁄4SOURCE button
Thses buttons are used to switch the source of your A/V Receiver / amplifer. Each time a source button is pressed, the remote control changes to the source which was pressed.
This remote control can control 12 types of equipment. To change the A/V Receiver / amplifier source, press this button twice within two seconds. The signal is sent when it is pressed the second time.
Note:
•Select the AMP as the source to use this remote controll with the SR7400.
⁄5LIGHT 1 and 2 buttons
Pressing these buttons will light up the LCD and its buttons. This lighting time can be set. If the lighting time is set to 0 seconds, the backlight turns on only while this button is pressed. The operations for LIGHT 1 and 2 are identical.
⁄6CLEAR button
This button is used to erase the memory or program of a source.
⁄7MENU button
(when AMP mode is selected)
This button is used to call up the SETUP MAIN MENU of the SR7400.
D
ASource Name indicator
This displays the name of the selected source, such as DVD, television, or other AV equipment (up to five characters).
BDirect Button Name indicator
This displays up to 20 types of button names for each source. (up to six characters)
CPage indicator
This displays the current page position.
DTransmission indicator
This lights up when the remote control is sending a signal.
EUSE indicator
This is displayed under normal operation.
FBattery Level indicator
This is displayed when the battery level is low.
GTIMER indicator
This is displayed when the macro timer is set.
HMACRO indicator
This is displayed when the remote control is in macro programming mode.
8
