RECORDING AN ANALOG SOURCE
In normal operation, the audio or video source selected for listening through the SR7400 is sent to the record outputs.
This means that any program you are watching or listening to may be recorded simply by placing machines connected to the outputs for TAPE OUT,
in the record mode.
To record the input source signal you are currently watching or listening to
1.
RECEIVER SR7400
|
|
|
|
| 1. | TV | DVD | VCR | DSS |
CLEAR | MEMORY | TUNING | F/P | MODE |
|
|
|
| |
|
|
|
|
| TUNER | CD | MD | ||
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| TAPE | AUX1 | AUX2 | AMP |
1. Press the AUX1 input source button to set video output.
2. Press the CD input source button to set audio output.
3. Now “CD” has been selected as the audio input source and “AUX1” as the video input source.
Notes:
•If you change the input source during recording, you will record the signals from the newly selected input source.
•You cannot record the surround effects.
•Digital input signals are only output to the digital outputs. There is no conversion from digital to analog .
When connecting CD players and other digital components, do not connect only the digital terminals, but the analog ones as well.
SPEAKER A/B
| AV SURROUND RECEIVER SR7400 |
|
|
|
|
|
|
| SELECTOR |
|
|
| PREV |
| MUTE |
|
|
|
|
|
| ||
|
|
|
|
|
| GUIDE |
|
|
|
|
|
| MENU |
| EXIT |
|
|
|
|
| TEST | CH.SEL | SURR |
|
| CLEAR | MEMORY | TUNING | 1 | 2 | 3 |
|
|
|
|
| 7.1CH | ATT | |
SELECT | ENTER |
|
|
| 4 | 5 | 66 |
|
|
|
|
| DISP | OSD | SLEEP |
| TV | DVD | VCR1 | DSS/VCR2 AUX1 | 7 | 8 | 9 |
|
|
|
|
| |||
POWER ON/STANDBY | PHONES |
|
|
|
|
|
|
CLEAR0 MEMO
SR7400 has speaker system - A and speaker system- B for front L/R channels.
You can select these systems by pressing SPEAKERS A/B button on the front panel or SPK- AB on the remote
2. If it is necessary to adjust the output level of each channel, use “7.1 Ch. INPUT LEVEL” in the OSD menu system as desired.
Adjust the speaker output levels so that you can hear the same sound level from each speaker at the listening position. For the front left, front right, center, surround left, surround right and surround back speakers, the output levels can be adjusted between
The subwoofer can be adjusted between
and +10 dB.
These adjustments will be stored to 7.1 Ch. INPUT memory. (see to page 21)
3. Adjust the main volume with the MAIN VOLUME
knob or the VOL buttons on the remote.
To cancel the 7.1 Ch. INPUT setting, press the 7.1 CH INPUT button on the front panel or press 7.1 CH on the remote.
ENGLISH
TV | DVD | VCR1 | DSS/VCR2 | AUX1 | TAPE | CD | TUNER |
| |
S |
|
|
|
|
|
|
|
| LIGHT |
|
|
|
|
|
|
|
| 1 | 2 |
RC1400
Learning Remote Controller
HT-EQ
7.1 CH INPUT.
The SR7400 is equipped for future expansion through the use of Multi channel SACD multichannel player or
Notes:
• When the 7.1 Ch. Input is in use, you may not |
select a surround mode, as the external decoder |
1. Select the input source to record by pressing the corresponding input selector button. The input source is now selected and you may watch or listen to it as desired.
2. The currently selected input source signal is
output to the TAPE OUT ,
OUT, and DSS/VCR2 OUT outputs for recording.
3. Start recording to the recording component as desired.
Recording the video from one source and the audio from another
7400
CLEAR | MEMORY | TUNING | F/P | MODE |
TV | DVD | VCR1 | DSS/VCR2 | AUX1 | TAPE | CD | TUNER |
PAGE 2
CH
TUNER CD
TAPE AUX1 AUX2
LIGHT
1
RC1400
Learning Remote Controller
M
D1
D2
D3
D4
D5
VOL
MD
AMP
2
When this is selected, the input signals connected to the L(front left), R (front right), CENTER, SL (surround left), SR (surround right), SBL (surround back left) and SBR (surround back right) channels of the 7.1 CH. In jacks are output directly to the front (left and right), center, surround (left and right) and surround back speaker systems as well as the
In addition, the signal input to the SW (subwoofer) jack is output to the PRE OUT SW (subwoofer) jack.
The video input source is selected in the SETUP MAIN MENU to use this procedure. (Refer to 7.1
determines processing. |
• In addition, there is no signal at the record outputs |
when the 7.1 Ch. Input is in use. |
• SBL and SBR of the speaker terminals are emitted |
no signal when the SURROUND BACK |
SPEAKER is set NONE in SPEAKER SETUP |
menu. (See SPEAKER SETUP, page 18) |
AUX2 INPUT
If you don’t need to connect 7.1 Ch. input terminals with multi channel decoder,
L(front left) and R (front right) inputs terminals are
You can add the sound from one source to the video of another source to make your own video recordings.
Below is an example of recording the sound from a
Press the AMP button and press the > button until PAGE2 is displayed. Press the
CH INPUT LEVEL, page 21)
1.
available as AUX2 input.
In this case, You can connect additional audio source to AUX2 as other audio input terminals.
compact disc player connected to CD IN and the video from a video camera connected to AUX IN to video cassette recorder connected to the VCR1 OUT jack.
|
|
| 1. |
| 2. |
|
|
|
|
| |
400 |
|
|
|
|
|
|
|
|
|
|
|
| CLEAR | MEMORY | TUNING |
| F/P | MODE | 2. | TV | DVD | VCR | DSS |
|
|
|
|
|
|
|
| TUNER | CD | MD | |
TV | DVD | VCR1 | DSS/VCR2 AUX1 | TAPE | CD | TUNER | TAPE | AUX1 | AUX2 | AMP | |
|
|
|
|
|
|
| 1. |
|
| LIGHT |
|
|
|
|
|
|
|
| 1 |
|
| 2 | |
|
|
|
|
|
|
|
|
| RC1400 |
| |
Learning Remote Controller
The tonal balance of a film soundtrack will be excessively bright and harsh when played back over audio equipment in the home. This is because film soundtracks were designed to be played back in large movie theater environments.
Activating the
|
|
|
|
|
|
|
|
| PREV |
| MUTE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| GUIDE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| MENU |
| EXIT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| TEST | CH.SEL | SURR |
|
|
|
| VOLUME |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
R | MEMORY | TUNING |
| F/P |
| MODE | DO |
| 1 | 2 | 3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 77..1CH1CH | ATT |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| 1. | 44 | 5 | 6 | TUNING |
| F/P | MODE | DOWN |
|
|
|
|
|
|
|
|
|
|
|
| DISP | OSD | SLEEP |
|
|
|
|
| TV | DVD | VCR | DSS | |
DVD | VCR1 DSS/VCR2 | AUX1 | TAPE | CD | TUNER |
| 7 | 8 | 9 |
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| MUTE | TUNER | CD | MD | ||
|
|
|
|
|
|
|
|
| CLEAR | 0 | MEMO | AUX1 | TAPE | CD | TUNER | TAPE | AUX1 | AUX2AUX2 | AMP | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| AUX1 INPUT | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| LIGHT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
|
| 2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| RC1400 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Learning Remote Controller |
| |
1. Press the 7.1 CH INPUT button on the front panel or press 7.1CH on the remote to switch the 7.1 channel input.
27
