DVD Setup Menu

Setting up the VIDEO SETUP page

1 Press the SETUP button.

2 Select VIDEO SETUP PAGE using the cursor buttons (2/3), then press the ENTER button.

3 Use the cursor buttons (5/) to select the desired item, then press the cursor (3) or

ENTER button.

VIDEO SETUP PAGE

TV SYSTEM

TV ASPECT

PROGRESSIVE

PICTURE SETTING

HDMI SETUP

COMPONENT

BLACK LEVEL

CLOSED CAPTION

Note

• Press 2 to go back to the previous menu item. Press SETUP to exit the menu.

TV SYSTEM

• Default setting: NTSC (USA model)

PAL (Europe model)

The colour system of the DVD system, DVD and TV should match: only then will it be possible to play a DVD on this system. Before changing the TV system, determine the colour system of your TV.

PAL – Select this if the connected TV has the PAL colour system. It will change the video signal of an NTSC disc and output it to PAL format.

NTSC – Select this if the connected TV has the NTSC colour system. It will change the video signal of a PAL disc and output it to NTSC format.

MULTI – Select this if the connected TV is compatible with both NTSC and PAL (multi-system). The output format will be in accordance with the video signal of the disc.

Select one of the options and press ENTER to confirm.

• Follow the instructions shown on the TV to confirm the selection (if any).

• If a blank/distorted TV screen appears, wait for 15 seconds for the auto recovery.

6

English

43

Page 43
Image 43
Marantz VC6001 manual Setting up the Video Setup, TV System, Default setting Ntsc USA model, PAL Europe model