CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT SAFETY

INSTRUCTIONS

READ BEFORE OPERATING EQUIPMENT

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of.

1.

Read these instructions.

2.

Keep these instructions.

3.

Heed all warnings.

4.

Follow all instructions.

5.

Do not use this apparatus near water.

6.

Clean only with dry cloth.

7.

Do not block any ventilation openings. Install

 

in accordance with the manufacture's

 

instructions.

8.

Do not install near any heat sources such as

 

radiators, heat registers, stoves, or other

 

apparatus (including amplifiers) that produce

 

heat.

9.

Do not defeat the safety purpose of the

 

polarized or grounding-type plug. A polarized

 

plug has two blades with one wider than the

 

other. A grounding type plug has two blades

 

and a third grounding prong. The wide blade

 

or the third prong are provided for your

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Additional Safety Information!

This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

Apparatus shall not be exposed to dripping or splashing and that no objects filled as vases, shall be placed on the apparatus.

When the switch is in the OFF position, the apparatus isn’t completely switched-off from the MAINS.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

NOTE:

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

safety. If the provided plug does not fit into

your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit

from the apparatus.

11. Only use attachments/accessories specified

by the manufacturer.

12. Use only with the cart, stand, tripod, bracket,

or table specified by the manufacturer, or

sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

DECLARATION OF CONFORMITY

This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

U.S. Responsible Party: Marantz America, Inc.

100 Corporate Drive,

Mahwah, NJ, 07430, U.S.A.

TEL: 630-741-0300

Type of Product: DLP Projector

Model:VP-15S1

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.

Page 2
Image 2
Marantz VP-15S1 manual Read Before Operating Equipment, Additional Safety Information

VP-15S1 specifications

The Marantz VP-15S1 is a high-performance projector specifically designed for home theater enthusiasts who seek exceptional picture quality and advanced features. With its powerful image processing capabilities and a suite of technologies, the VP-15S1 aims to deliver an immersive cinematic experience.

At the heart of the VP-15S1 lies its impressive DLP (Digital Light Processing) technology, which ensures sharp, vibrant images with high contrast ratios. The projector boasts a resolution of 1920x1080 pixels, providing Full HD clarity that's perfect for watching movies, playing video games, or enjoying live sports. The VP-15S1's brightness of 2200 ANSI lumens allows it to perform well in various lighting conditions, ensuring that images remain vivid even in partially lit rooms.

One of the standout features of the VP-15S1 is its advanced color management system. With a wide color gamut, the projector is capable of accurately reproducing a broad spectrum of colors, resulting in lifelike visuals that enhance the viewing experience. The VP-15S1 supports several color modes, allowing users to choose from settings optimized for different content types, from bright and colorful cartoons to darker, more subdued films.

The Marantz VP-15S1 also incorporates cutting-edge video processing technologies, including frame interpolation and motion smoothing, which minimize blurriness and enhance the smoothness of fast-moving scenes. This is particularly beneficial for action-packed movies or sports broadcasts, where quick movements often lead to distracting artifacts.

In terms of connectivity, the VP-15S1 is equipped with multiple input options, including HDMI, composite, and VGA ports. This versatility makes it easy to connect a wide range of devices, from Blu-ray players and gaming consoles to laptops and streaming devices. Additionally, the projector features built-in audio capabilities, providing adequate sound for casual viewing without the need for external speakers.

The design of the Marantz VP-15S1 is both sleek and functional, with adjustable lens shift and zoom capabilities that allow for flexible installation in any home theater setup. The inclusion of a quiet fan ensures that the noise levels remain low, allowing viewers to immerse themselves fully in the film without distractions.

In summary, the Marantz VP-15S1 projector stands out for its combination of advanced DLP technology, vibrant color reproduction, robust connectivity options, and quiet operation, making it an excellent choice for anyone looking to elevate their home viewing experience to the next level. Whether for casual movie nights or serious home theater setups, the VP-15S1 is built to impress.