![1. 2. 4.](/images/new-backgrounds/18044/1804421x1.webp)
ENGLISH | Setting the NIGHT MODE compresses the | ||
| SOUND EFFECT SETTING | ||
| The Sound Effect mode is set as follows: Sound | ||
| dynamics increase in the order of MODE1 → | ||
| MODE 2 → MODE3. |
| |
| dynamic range . |
|
|
| This softens loud passages such as sudden | ||
| explosions, to help prevent disturbing others late | ||
| at night. |
|
|
| 1. | 1. 2. 4. | 3. |
1 .
1. Press the ENTER button once, then press the button three times.
2. Press the ENTER button again.
3. Select a Sound Effect mode. Each time the
button is pressed, the Sound Effect mode changes in the order of
OFF → MODE1 → MODE2 → MODE3 →
NIGHT MODE → OFF.
Each time the button is pressed, the Sound Effect mode changes in the order of
OFF → NIGHT MODE → MODE3 → MODE2
→MODE1 → OFF.
WOW is activated in all three Sound Effect modes: 1, 2 and 3.
4. Press the ENTER button to return to the normal display.
8
DISPLAY DIMMER SETTING
The brightness of the FL display can be adjusted. The display darkens in the order of OFF → LEVEL1 → LEVEL2 → LEVEL3.
1. 1. 2. 4. 3.
1 .
1. Press the ENTER button once, then press the
button four times.
2. | Press the ENTER button again. |
3. | Select a dimmer level. Each time the button |
is pressed, the brightness of the FL display changes in the order of
OFF → LEVEL1 → LEVEL2 → LEVEL3 →
OFF.
Each time the button is pressed, the
brightness of the FL display changes in the order of
OFF → LEVEL3 → LEVEL2 → LEVEL1 →
OFF.
4. Press the ENTER button to return to the
normal display.
CLOCK SETTING
The time is set as follows.
1.3. 5. 7.
1. 2. 8. | 4. 6. |
1 . |
|
1.
2.
3. Each time the and buttons are pressed, the clock switches between the
4. | Press the | button to get the hour setting. | ||
5. | Press the | and buttons to set the hour. | ||
|
|
|
|
|
|
|
|
|
|
6. | Press the | button to get the minutes setting. | |||
7. | Press the | and | buttons to set the | ||
| minutes. |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
8. Press the ENTER button to start the clock and return to the normal display.
STANDBY MODE SETTING
The ZC4001 has two Standby Modes. The Standby Mode is set as follows.
ECONOMY: This is a low power consumption mode. The clock is not displayed.
NORMAL: This is the normal standby mode. The clock is displayed.
1. 1. 2. 4. 3.
1 .
1. Press the ENTER button once, then press the
button six times.
2. | Press the ENTER button again. | ||
3. | Each time the | and | buttons are pressed, |
| the Standby | Mode | switches between |
“ECONOMY” and “NORMAL”.
When “ECONOMY” is set as the Standby
Mode, the time is not displayed when the unit is on standby.
Also, the Wake Up Timer cannot be set in the Economy mode.
4. Press the ENTER button to return to the
normal display.