Preparation and Connection
.:. Before making connections
Be sure to turn the power off for the ZS5300 and other products to be connected to ZS5300 before making connections.
Please refer the instruction manuals for other products to make sure of the proper connections and terminals.
•:. Keypad
The keypads that can be connected to the unit are keypads and connecting boxes made by NILES and XANTECH shown below. If you want to use products that are not in the list below or made by other manufacturers, please contact your authorized Marantz dealer.
• NILES
Keypad | : IntelliPad |
IR Main System unit | : IRP6+ |
IR Sensor | : MS2 |
IR Flasher | : |
·XANTECH
Keypad | : SMARTPAD3 |
Connecting block | : |
IR Sensor | : |
IR Emitter | : 282M |
Note:
When connecting a Keypad, refer to the instruction manual for the Keypad as well as for this unit.
IConnecting speakers
There are 2 ways to connect speakers. See the pictures below.
.:. Connecting speaker wire
1.Strip away approx..6/8 inch (20 mm) of wire insulation.
(ob~
~I
Approx. 6/8 inch
(20mm)
.:. Connecting banana plug
Banana plug connections are also possible.
2.Twist the bared wire ends tight to prevent short circuits.
~~O~ +,§sssssssss~
3.Insert the bare part of the wire into the hole in the each terminal as follow.
9
