Functional Overview
IFront panel
654
~~""'''.roHE5B.ECTORI~
o
~II--~I
1 | 2 | 3 |
CD Main power switch (POWER ON I STANDBY)
Press this button to turn the main power on. Press again to turn it off. When the main power is turned on, Zonei, Zone2 and Zone3 turn into standby mode and power for each zone can be switched with the remote control unit RC5300ZS (provided) or a Keypad (option). For regular use, please leave the unit powered on.
®Volume level indicator (LEVEL)
These indicators show the level of the volume. When all the indicators light up, the volume is at the maximum level. When all the indicators lights are off, the volume is at the minimum level. Volume can be adjusted individually from each of Zonei, Zone2 and Zone3. Volume adjustment can be adjusted, with the remote control unit or a Keypad.
Mute indicator (MUTE)
These indicators flash when the sound is muted. When volume is at the maximum, all the indicators flash. When the volume is at the minimum, only the first indicator flashes. Mute can be controlled individually from each of Zonei, Zone2 and Zone3. Muting can be done with the remote control unit or a Keypad. If the volume is adjusted when muted, mute is released.
@Standby indicator (STANDBY)
This indicator lights up when any of the zones are in standby. Zone1, Zone2 and Zone3 can be in standby mode independently. Power for each zone can be controlled with the remote control unit or a Keypad.
@) Direct indicator (DIRECT)
When the "Zone Direct" input is chosen for the source, this indicator lights up. The source connected to the "Zone Direct" terminal for Zonei can be selected only for Zonei. The same applies for Zone2 and Zone3. Source selection can be selected with the remote control unit or a Keypad.
@Input-indicator (INPUT)
Depending on which input is selected in each zone, the appropriate INPUT indicator will be illuminated. The Inputs can be selected by a remote control unit or a Keypad.
®IR (Remote contrOl) sensor
This window receives infrared signals from the remote control unit.
Caution
When these indicators are flashing, no sound is outputted. When releasing mute, please check the volume position. If volume is set too loud, the speakers may be damaged.
4
